Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

How to make a Krenov style shelf support

Posts

How to make a Krenov style shelf support

#1

How to make a Krenov style shelf support

Bill Tindall, E.TN

>As a �practical� cabinet maker there are some of Krenov�s philosophies that I don�t subscribe to. But one point we agree on is that the appearance of metal should be minimized inside fine cabinetry. I find nothing more off-putting than to open a cabinet and see the mechanical wizardry of a European hinge. I find most shelf supports similarly unattractive compared to the wooden ones used in Krenov pieces (Figure 1).


img

Re: How to make a Krenov style shelf support

#2

continued...

Bill Tindall, E.TN

>These supports are easy to make. Begin with two sticks slightly more than �� thick, �� high and a few inches long. With two sticks one can make supports in groups of four at a time. Set the saw blade to make a �� deep cut. Set the miter stop block (I find this Accumiter particularly handy for the task) to make a cut �� from the end of the sticks, and then moving the block another �� make 4 more cuts 1� from the end of the sticks(See Figure 2).


img

Re: How to make a Krenov style shelf support

#3

continued...

Bill Tindall, E.TN

>With a band saw or small hand saw cut away the diagonal as shown in Figure 3. Next, using a knife make a deep scribe line to establish the shoulder of the �� round tenon. Whittle the tenon to make it round and refine its roundness with a dowel sizing template if necessary. With a continuous paring cut refine the diagonal cut into a smooth arc. This end grain cut will require a sharp knife. While it may look hard, it is surprisingly easy to do even for someone that does not carve(me). Finally, cut off the finished support with a fine toothed saw, for example a Zona saw.


img

Re: How to make a Krenov style shelf support

#4

Nice tutorial, Bill

Ellis Walentine, Host

>I agree with you about metal shelf rests. The wooden ones are so much nicer. Thanks for showing us how you do it.

Ellis

Re: How to make a Krenov style shelf support

#5

Re: continued... *LINK*

Brandon Mclean

>Thanks for the posts with the pictures Bill.


Find Wooden Toy Wheels

Re: How to make a Krenov style shelf support

#6

Re: How to make a Krenov style shelf support

Mike Caldwell

>You do very lovely work.

I'm with you on the European hinges, but they work good. Have you any alternatives? Thoughts?

Mike Caldwell

Re: How to make a Krenov style shelf support

#7

Re: How to make a Krenov style shelf support

Bill Tindall, E.TN

>Have you any alternatives? Thoughts?

Yes, conventional butt or knife hinges.