Ramblings from a woodworker on a budget
john lucas
>I've been working in wood now for a little over 30 years. I have always had an extremely tight budget so consequently I have bought some junk, not so junk, and OK equipment. Most of my shop is now equipped with what I would call mid priced equipment although I still tend to pick up a good deal from Harbour Freight, Northern Tools, and the like on occasion.
Learning woodworking from mediocre equipment has actually taught me a lot. I've had to learn where the tolerances are on my machines and how to tune them up. This often led to some careful modifications and my interest in metal working has developed to the point of serious modifications. Learning to tune flea mkt medium priced hand planes has been interesting and a good learning experience.
Up until my last table saw the ones I had would not cut accurately so I had to learn to hand plane and new ways to use the router to make the tight joints. I've spend serious time tuning my table saw, bandsaw, jointer and planer and have modified them slightly where the factory specs weren't up to snuff.
I guess what I'm trying to say is that if I had started with high quality tools I might not have learned all the skills I have today. I don't know that I would have built any better furniture, although I would have done it faster and with less hassle.
I know, and believe you should get the best quality you can afford, but I have learned so much by having mediocre tools and this has allowed me to help others who also buy less than the top stuff. Lets face it, many people do woodworking on a seriously limited budget. I remember when $200 for a table saw was a major purchase for me. $2000 is what I'm lusting after today.
I now have a $2000 lathe and really enjoy it but I learned so much from my absolute junk lathes that needed modifications of almost every part in order to work correctly.
It does take time away from my woodworking but I guess this is part of what I enjoy about this hobby.



