Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Teaching Question

Posts

Teaching Question

#1

Teaching Question

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>I have been contacted by someone wanting me to teach him basic woodworking for a couple of weeks. I normally don't care to deal with the basic level, but would rather work on higher skill levels. But since things are a bit slow, I am considering it.

What I had suggested was to have him commission me to make a piece that we worked on together, that he then got to take home in the end. But then, I thought a better idea might be to just start him out with a simple table, while I worked on a more challenging one at the same time.

In the end, he has his table, as well as insights into how to use basic skills, with a bigger picture for on down the road.

He has ask if I can we build a syllabus. Do any of your guys that teach already have a file that you would share to give me an idea of how a basic woodworking syllabus should look for building a simple table?

What do you think of this idea, could it work, or should I just stick to the basic one on one?

Also, how much do people normally pay for a two week course?

Re: Teaching Question

#2

Re: Teaching Question

Clint Searl, at the base of Haycock Mtn

>Teaching aside, what would you charge for the use of your space and tools, including liability? From there, you can set a rate for instruction, and add that. The syllabus thing doesn't fly; there are a zillion plan and how-to books already available. I think I would direct him to the local community college or VoTech HS nite school.

Clint

Re: Teaching Question

#3

Re: Teaching Question

Ed Mulligan, Cape Cod

>I think your hourly shop rate plus materials would be a starting point for your fee.

Regarding course content, since there is just one person, it should be customized to his goals. What does he want to make? Kitchen cabinets? Solid wood table?

You surely aren't going to pack years of your knowledge into a week or two, but you can cover some basics: machine and hand tool safety, sharpening, milling, wood properties, common joints, glue-ups and so on.

If he has his own shop you could meet with him for an hour or two for guidance as he approaches a new process and then let him do the busy work in his shop and then follow up and critique.

Liability that Clint mentions is definitely a priority for you.

Re: Teaching Question

#4

Re: Teaching Question

McKay

>I have been a wood shop instructor for 30 years and still love it. However, I wake in the night sweating because of the liability involved. Why do you think that companies like Dewalt et.al. do not offer safety courses? It is because of liability issues. I had the risk management of the state tell me that I should teach the stage crew how to safely build sets. I do not maintain the scene shop. I am not in the scene shop at the times that they work. So why would would anyone take on the liability? At school I am covered with a million dollar policy. At home I have my own insurance. I would NEVER teach someone unless I had a HUGE liability policy. Even after they have left your facility, they could claim that you did not teach them properly. I keep my safety records for 5 years.

Just my 2 cents

Re: Teaching Question

#5

Re: Teaching Question

Tony - Memphis

>I took woodworking 101 via a continuing ed class at our local university. We learned safety first, then all the basics of the tools (much safety there - safety zones, etc. - all the stuff that isn't intuitive about power tools). I still think of my instructor watching me use the table saw and remembering to allow the saw to stop before removing the piece (I started to not wait, but then remembered - I got a grin of approval fromt he instructor). We did some operations by hand before we used each tool so we could related what the tool was doing. After that, we built a simple book rack. In woodworking 102, we built a small Shaker style table (tapered legs) out of birch (he bought 1000 bdft cheap).

Aside from the liability issue others have mentioned (which is a sad reality), I think its great that you could teach someone the right way and get them started in this sickness/hobby we all share. I think a sylabus is a good idea. Almost like a contract that you both know what to expect. In the more advanced classes I have taken, I thought it was very beneficial when the instructor built the same project with us. They could show us the operation on their parts and then we could attempt to duplicate.

Anyway, good luck with it whatever you decide. The classes I took were pretty cheap given that it was a group at a university program. Seems like most of the classes offered nowadays are around $100/day just for instruction.

Tony

Re: Teaching Question

#6

Re: Teaching Question

thom.brad@yahoo.com

>I hate to agree that the liability of having someone in your shop that is not an employee is huge. One mistake and you could lose your shop in a lawsuit.

I have a friend that has his own shop but wanted to learn some veneering, he comes to my shop for a couple hour demo, no power tools, and goes home to practice what we covered. Haven't charged him yet but the classes could certainly be expanded to a pay format. The current rate seems to vary from $100-$250 per day depending on who is teaching and how long the course is.

Personally I wouldn't do it, send him to the local community college for classes and see it you can get hired on to teach there instead.

Brad

Re: Teaching Question

#7

Waiver

Tony - Memphis

>In almost all of the classes I have taken, I had to sign a waiver/release. Maybe that would solve the liability issue?

Tony