Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Bessey clamps

Posts

Bessey clamps

#1

Bessey clamps

DP

>I was lucky enough to get 8 Bessey clamps for Christmas. Wow what great clamps! Can anyone tell me some of their secrets for keeping the glue from sticking to the bar? I've been using the blue painters tape, but thought maybe there was a better idea.

Thanks

Re: Bessey clamps

#2

Less glue

Clint Searl, at the base of Haycock Mtn

>There appears to be a common tendency to slather two or three times as much glue as necessary to hold a joint. Squeeze-out means too much glue.

Clint

Re: Bessey clamps

#3

A little squeeze out is a good thing.

Mac in Indy

>I'd have to agree with Clint that we all tend to put too much glue in the joint and get it all over the clamps, table and/or the project. That said a little squeeze out is fine. I love to see a little row of beads pop out along the joint letting me know it isn't glue starved, however if it drips or runs I've used too much and pay the price, cleanup!

As to your original question I don't wory about a little glue on the bars as it all pops off pretty easily after it dries.

Mac

Re: Bessey clamps

#4

Re: Bessey clamps

Jim Dillon

>DP,

Congrats on your nice Xmas gift; someone knows how to please a woodworkers heart! Agree with the others regarding glue usage and the fact that, when dry, the glue will just peel off maybe with a little help from a utility knife etc. Besides, it will give the clamps some "character". If handy, I have sometimes slipped wax paper between the wood and clamp but usually don't bother.

Jim

Re: Bessey clamps

#5

JL

Re: Bessey clamps

JL

>I usually don't bother. I pop it off with a knife or dull chisel - but I don't have Besseys either.

I have rolls of plastic film. I use these to shield my clamps and my bench top. You can use rolls of wax paper, plastic wrap or even polyethylene sheeting. The glue typically will pop off the polyethylene.

Re: Bessey clamps

#6

Yup

George@Colonel's Workshop-Havertown PA

>Good Morning DP,

I began using plastic sheeting a few years ago to shield clamps and work surfaces from the onslought of cascading glue ooze. Its especially important in small shops like mine which employ cast iron table saw tables occasionally to support glue-ups. In the end, all I do is roll up the sheet plastic for re-use. as to the quantity of glue used, I never seem to get that right. It always drips.

George

Re: Bessey clamps

#7

Re: Yup

Alan in Little Washington (NC)

>If you didn't have a chance to cover the bar and have glue to remove, I have heard heat- heat gun or propane torch will loosen it so you can scrape it off with a plastic scraper or finger nail.

Re: Bessey clamps

#8

Re: A little squeeze out is a good thing.

Fred Davis

>I agree Mac, a little squeeze out is a good thing ;-))

Getting hysterical over glue cleanup serves no useful purpose

FredD

Re: Bessey clamps

#9

Congrats and keep them clean

Chris Knob

>I have lots of Bessys and glue build up on the rails is a problem. Small amounts of glue that dry will affect the smoothness of the slide. I clean them right away with a sponge.

Re: Bessey clamps

#10

Re: Bessey clamps

Barry Irby

>I don't have Bessey's. Wish I did. Couldn't you coat the bars with paste wax to make clean up Easier?

Re: Bessey clamps

#11

Jesper, Denmark

Re: Bessey clamps

Jesper, Denmark

>Wax the clamp bars, and comes off easily when dry.

Trying not to get the glue on the clamp bars is just too much dinking around.