Shark Guard Gloat *LINK*
mdclor
>Yesterday I received my Shark Guard from Lee Styron. Today I installed it. The installation was easier than I thought it would be and I am not mechanically inclined. I elected to get the version that has a 4" dust port on the top and I ran a 4" by 10' clear flexible hose to the 6" PVC tube that goes from my dust collector to the back of the saw. The hose is hung from the ceiling by a strip of plastic hanger tape to keep it out of the way.
Per Lee's suggestion I cleaned out the bottom of the cabinet saw and cleaned the top as well since I was in the cleaning mode. Once installation was complete, I ripped a few boards to test it out. I am ecstatic to report that I was not able to see any dust come off the top of the blade. Without it, I would have has a coating of dust on my work bench 4' away, but there was no dust on the bench or on the top of the saw or in the air that I could smell.
I believe this product to be very worth the money and recommend it to anyone that doesn't already have over the blade dust collection. The only downside it that due to the popularity of the product, there is considerable lead time from placing the order to delivery. I think it is worth the wait. No affiliation other than being a very satisfied customer.
Merle
Shark Guard



