Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Fully threaded stainless steel screws

Posts

Fully threaded stainless steel screws

#1

Fully threaded stainless steel screws

Brandon in Cincinnati

>I prefer to frequent a locally owned hardware store near my home whenever possible. I went there recently looking for stainless steel wood screws for a snow sled I am building for my kids. They didn�t have �traditional� wood screws in stainless (by traditional I refer to partially threaded screws with a tapered shank). What they had looks exactly like a flat head machine screw (fully threaded, Phillips drive, flat head), except it has a point instead of the flat end that machine screws have. They were called simply �metal screws�. Are these actually intended for wood? It seems to me that these will work just fine as along as I predrill accordingly. Can anyone shed any light on what these are intended to be used for?

Re: Fully threaded stainless steel screws

#2

Re: Fully threaded stainless steel screws

John K Jordan

>I have sheet metal screws that look like that, if I understand you correctly, threaded all the way from the point to the head, the shaft not tapered except for the very point - flat head, pan head, round head, phillips, straight. I often use sheetmetal screws in wood.

JKJ

Re: Fully threaded stainless steel screws

#3

Does sound like sheet metal screws

Bill Houghton, Sebastopol, CA

>Like John Jordan, I use them regularly in wood, and they work fine. Predrill your holes - clearance for the first piece, "tap" (drill the size of the minor diameter of the screw) for the second piece.

Real wood screws are getting more and more rare.

Re: Fully threaded stainless steel screws

#4

Re: Fully threaded stainless steel screws

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Brandon, besides SS, you should be able to get galvanized sheet-metal screws cheaper. As stated above, you can get them in lots of head configurations. The metal is harder and tougher than what is normally used in wood screws.

Re: Fully threaded stainless steel screws

#5

Thanks everyone!

Brandon in Cincinnati

>

Re: Fully threaded stainless steel screws

#6

Re: Fully threaded stainless steel screws

John K Jordan

>Speaking of screws, I found some aluminum lag screws on the clearance stand at the local hardware store the other day. I didn't know such screws existed. I have no idea what I'll use them for but I had to have some.

I was looking for (and found) some aluminum roofing nails. I like to use these instead of steel when mounting No Trespassing signs to trees. I hate to cut through steel on the sawmill.

JKJ

Re: Fully threaded stainless steel screws

#7

Re: Fully threaded stainless steel screws

Brianna

>Where can i find place to buy hardwood floors at reasonable rate? does anyone know?