Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Bally Block Trip Again

Posts

Bally Block Trip Again

#1

Bally Block Trip Again

Mike Jurnigan in Suffolk

>I am thinking about doing another Bally Block trip again. The details for the trip are as follows: I plan on doing the I-64 and I-95 corridor from the Hampton Roads area towards Richmond and North towards DC and Baltimore.

I plan on driving up To Bally on the 13th of February and come back on the 14th or 15th. I want to stop by York on the way back and pick up some White Pine for seat blanks for a possible chair class I have coming up in March. If there is enough interest; I will pick up your top at Bally and delivery your top within a reasonable distance from the Interstate. You would have to send me the money for the cost of the top and I would like to get $30.00 for my time and gas. Bally only accepts cash for these tops. You would need to get me the money to me in time for me to ensure that I have cash for the transactions.

You will need to contact Bally and make the arrangements for the top you want and the cost. I will provide the contact information for Bally later. You will have to unload the top from my truck yourself as I will not be able to offer much assistance in unloading since I came up on the �short end� of a jointer accident during the Christmas holidays. If you are interested, contact me at either Mike23439@yahoo.com or by phone at 757-657-6818.

Mike in Suffolk Virginia

Re: Bally Block Trip Again

#2

Re: Bally Block Trip Again

Bill sams

>Mike, are you aware of the fact that there is a company in Richmond that carries Bally Block countertops? I bought 3 8' sections a couple years ago, delivered! I in fact ran across their contact info today looking through my contacts, their name escapes me at this very moment. I will post their contact info tomorrow when I return to my shop.

This is useless info if in fact you just want to drive for the pleasure of driving:-)

Re: Bally Block Trip Again

#3

Re: Bally Block Trip Again

Alan in Little Washington (NC)

>I might be wrong, but I think Mike is going to pick up seconds, which the PA Bally location sells very cheaply. That is why he mentioned about checking stock available- sometimes they have a lot, sometimes not. The seconds are only seconds because they have minor flaws that people won't want in a kitchen but are acceptable in a shop.

Re: Bally Block Trip Again

#4

maybe some more information??

Bill Tindall, E.TN

>It may well be that some, if not many, lack sufficient information to know if they are interested in this offer. It would seem from this note that it is assumed that everyone knows about this product, what ever it is.

Re: Bally Block Trip Again

#6

Re: maybe some more information?? *LINK*

Bill Sams

>Here's a link to Bally Block"s products, which is also accessible through central wholesale's website

http://www.ballyblock.com/


http://www.ballyblock.com/

Re: Bally Block Trip Again

#7

Re: maybe some more information??

Alan in Little Washington (NC)

>Interesting that the Bally site has a link to a distributor who ships coast to coast- Grizzly!

But again, I think the OP is talking about picking up seconds.

Re: Bally Block Trip Again

#8

Re: Bally Block Trip Again

Mike Jurnigan in Suffolk

>These are seconds that are much cheaper than you can buy anywhere else. A lot of the seconds are cosmetic and cheaper than you can buy the raw lumber for. I got a 3 1/2" by 3' by 12' in hard maple for $120.00 last time.

Re: Bally Block Trip Again

#9

Clarification

Mike Jurnigan in Suffolk, VA

>A little clarification about the tops from Bally. I have made several trips to Bally Block to purchase tops and in one case some lumber. The tops that I am referring to are "seconds". Most of the seconds are cosmetic in nature. Either a darker streak of wood down the middle or edge of the top. By dark, I mean several pieces of heart maple versus the sap. Something that would not be an issue on a work bench. The last top that I purchased, the finish was scratched. Not a deal breaker either. The tops are at a significant savings over retail or wholesale prices. One of the woodworking stores and an advertiser here at Wood Central sells Bally workbench tops. They were about 3' X 6' x 1 1/2" thick. The price was in the $300.00 range. Last time some of the guys bought an ash top that was 3' X 8' 1 1/2" to 1 3/4" for $60.00 to $80.00. Some of the tops had some holes drilled in them for some equipment that was to be attached.

I may not be from up North but there has to be some Yankee in me, because when I can by a glued up and finished top for less than what the raw lumber would cost me, I can be cheap. I do have a personal interest in this. If there is enough interest, it helps me save some gas money and you also get a top delivered to your door at a significant savings over retail. I believe one or two of the guys that bought several tops actually installed them as kitchen counter tops. If you are interested you need to talk with Russell at Bally. Their number is 610-845-7511. Russell was accurate in his description of the items that he sold. I tried to call him yesterday, but I was placed on hold for about 10 minutes while they looked for him. I had to end the call since it was eating my minutes up.

If you have other questions feel free to call or e-mail as listed in my original post.

Thanks,

Mike

Re: Bally Block Trip Again

#10

Re: Clarification

Alan in Little Washington (NC)

>Mike, I got in touch with Russell who is holding a slab for me. I will send you and email.

Re: Bally Block Trip Again

#11

Re: maybe some more information??

Brandon Mclean

>Thanks for the provided INFO!