Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Ceramic Tile Inlay

Posts

Ceramic Tile Inlay

#1

Ceramic Tile Inlay

Jerry Draper

>I am making a coffee table with ceramic tile inlayed in the top. The substrate for the tile will be 1/2 inch plywood. I am concerned that the plywood may bow when the thinset is applied. Should I waterproof the plywood surface or is it necessary?

Anyone have suggestions?

Re: Ceramic Tile Inlay

#2

Re: Ceramic Tile Inlay

Clint Searl, at the base of Haycock Mtn

>Use tile setting mastic to lay the tile. It will be enough of a barrier to prevent the grout from affecting the substrate.

Clint

Re: Ceramic Tile Inlay

#3

Re: Ceramic Tile Inlay

Justin Szeliga

>The reason a floor doesn't bow, at least not noticeably, when tiled, is that it is at least 3/4" thick, & supported by framing that doesn't deflect very much at all. Perhaps, given that you are using 1/2" ply, & you may not have any other support under the table, dampen the opposite side of the plywood as you mastic the tiles in place. The expansion should counteract itself.

Peace

Justin

Re: Ceramic Tile Inlay

#4

Thanks for the replys.

Jerry Draper

>