Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>12 Jan 2009

Good Morning,

Happy New Year to all of you that I missed earlier this year.

The kitchen table project is still in the works. Seems like it's been going on for about 4 years now, but that's not accurate. It's more like 3 months plus a weeks or two. I hate it taking me this long, but work at the day job and family have taken a great deal of my time and the LOML decided this morning that I really needed some rest after a week like I had last week. So she let me sleep in a bit this morning.

It's cold her today and going to get colder later in the week. So far, we haven't had any snow, but we have had some freezing rain and sleet. Just enough to cause driving problems on bridges and overpasses and enough to bring down tree limbs that were weak already. I know some of you have been hit pretty hard with winter weather and I wish each of you safety and comfort.

All sanding is done on the table, the top now has a wash coat of Dark Garnet Dewaxed Shellac and is waiting for the final 400 grit sanding. Then it will be time for me to break out my HVLP setup and spray the lacquer finish. The base of the table will be glued up today with Plastic Resin Glue. I like using this glue because it has a long open time and the only real downside to this glue is that it has a long set time (18 hours). If you've never tried it? I encourage you to try it. When it's set, it is a very rigid glue...unlike all your PVA type glues which are still pretty flexible after they have set. Any way, the table base will be done today and ready for a wash coat of Dark Garnet Shellac this evening. It will be time for me to go and buy the Lacquer today and I sure wished I could get some Target Coatings finish locally as I'd really like to try their water-based Lacquer product. I've heard it is really good and has the same properties as a standard pre-cat lacquer. Oh well, it will be Deft Lacquer as that is what I can get locally. I've gone to Sherwin-Williams about buying their lacquer, but they have to special order it and I also have to buy case quanty....and I just don't use that much lacquer in a year or ever 2....so that is out of the question.

Enough about me and what's going on here......

So what did YOU do this weekend??

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Alan Young

I delivered the Music Cabinet.

Alan Young

>It seems happy in it's new home:




Alan

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Jay St. Peter - Southern, MD

>Last week I fixed the door tensioning mechanism on my dishwasher for the umteenth time and managed to move it enough to cause a slight leak where the line ties in. So, it spent the last week leaking into my shop. Luckily, it kind of leaked into the middle of the shop and the only casualty was the MDF top of my Festool MFT. After letting it dry over the weekend, I was able to use the old top as a template to make a new one. Between cleanup and remaking the top, it cost me around 6 hrs. so far. It'll be more since I have a little drywall work and paint to do, but no money out of pocket. I did lose some scraps also, but overall pretty lucky.

I do want to slap the engineer that designed the tensioning mechanism on the dishwasher. 5 years old and this is the third time I've replaced it ... on a nearly $1K dishwasher. That engineer needs a good hard smack in the back of the head. Strings on pulleys that don't spin ... sheesh. The latest kit came with replacement pulleys that do spin, so we'll see. Maybe the strings will last 2 years instead of 1.

Jay

Re: WC Weekend Accomplishments....

#4

Cherry Box Jointed Box for #2 Son..

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

The shop throttles are set at flight idle, but I finally got an order for some furniture. Happily Dennis, its another table so we are doing something similar. My #2 daughter needs a 60 inch long (plus leaves )breakfast table and we decided on maple. Now I'm looking around for wood nearby which won't cost an arm or leg. My #2 son Eddie asked me for a small box to house his barber shop clippers. Ed's the barber of the family and regularly turns my shop into an exclusively male beer sipping refuge/clip joint. I dug out the P+C 4212 jig and made one for him out of a stash of resawn cherry 3/8 veneer. I think I'll use potassium dichromate to oxidize it. Sunday was not quiet. My #5 son Steve and #7 son Jim were with me to watch Eagles and Cardinals games while slaking their thirst. I've been a Cardinal fan since before they moved from St Louis, where I went to school. Next week's contest will be thrilling for me and I have cancelled the normal dinner party. Have a great week, Dennis. Glad your wife let you sleep late.

George

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Glenn Madsen near San Francisco

>The weekend started early, on Thursday evening, with the woodturners' club meeting, and a hollowing demo for a laser guided home built device. There are some really talented retired engineers in our group. One of them had a pile of wood to be rid if, so that was scheduled for Saturday morning.

Friday morning was the chair building class. A Windsor Bowback chair from a FWW article from 1994 is the topic. The class runs from now until the end of March. We talked, and tore into a couple of truckloads of wet white ash, and sugar pine, and are building perhaps 15 chairs, and a couple of stools. Saturday afternoon got spent, among other chores, rough turning the legs and stretchers.

And there's that stack of black acacia turning stock on the driveway that needs attention...

Where's the Advil?

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Mike Fitterling

>Didn't manage to get much woodworking in this weekend. Andrea was out of town since Wednesday on a business trip to Arizona and I had the kids to myself! And Tess ran a fever the whole time. yikes! I did manage to rip and cut to length the poplar for the drawer sides for the drawers for the bath cabinets. Tomorrow, we may start dovetailing--12 drawers in all so that will be great practice hand cutting. Managed to get the last sheathing up on the existing screen porch, which will receive the same Hardiplank siding as the addition.