Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Spiral trim bit...WOW!!!

Posts

Spiral trim bit...WOW!!!

#1

Spiral trim bit...WOW!!!

Ralph Turney in Huntington Beach

>I just wanted to say thanks for the help in choosing between a straight trim bit and a solid carbide spiral trim bit. I have had a straight bit lying around that I bought many years ago and had never used, but wanted to keep the noise down in my condo complex. So with the advice of some of the member here, I plunked down the money and bought a 2" spiral trim bit from Whiteside and the difference was astounding. Not only was the spiral very quiet compared to the straight bit, but it also cut like butta. Except for a couple of gaffs on my part the cut that the spiral bit made in direct comparison to the straight bit was VERY noticeable better. So, if you need a template trim bit for 8/4 material, I believe that the spiral bit is the only way to go.

Thanks!!!

Ralph

Re: Spiral trim bit...WOW!!!

#2

Ellis Walentine

Glad it worked out for you

Ellis Walentine

>That's the value of these forums -- to get practically real-time answers to your questions. I'm glad our folks steered you to such an enlightening experience. I wonder what else you'll be wanting to know...

Ellis

Re: Spiral trim bit...WOW!!!

#3

Re: Glad it worked out for you

Ralph Turney in Huntington Beach

>Should I stay with Directv or go with FIOS??? J/K

I went with FIOS...but I do come here for answers and opinions to just about anything.