Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Is it bad to put 6 inch wheels on a 8 inch grinder

Posts

Is it bad to put 6 inch wheels on a 8 inch grinder

#1

Chet Kloss

Is it bad to put 6 inch wheels on a 8 inch grinder

Chet Kloss

>I have a 8" slow speed grinder (1725 rpm I think) and I thought using 6" grinding wheels would result in an overall slower speed at the point of grind (and therefore a cooler grind).

Thanks,

,,,,,,,,,,,,,,,,,Chet

Re: Is it bad to put 6 inch wheels on a 8 inch grinder

#2

Re: Is it bad to put 6 inch wheels on a 8 inch gri

Virgil J

>The 8" wheel will be better. Larger circumference, more abrasive.

Re: Is it bad to put 6 inch wheels on a 8 inch grinder

#3

Re: Is it bad to put 6 inch wheels on a 8 inch gri

Ed Mulligan, Cape Cod

>You might have some problems getting the tool rest close to a 6" wheel. Maybe not. Depends on the grinder.

Frequent dressing and /or a suitable wheel will help avoid burning.

Re: Is it bad to put 6 inch wheels on a 8 inch grinder

#4

Re: Is it bad to put 6 inch wheels on a 8 inch gri

GalenV

>6" rim speed will be slower, true, but cool grind can be done on 8" by less pressure on the wheel and shorter time. I think preference to 6 or 8 inch and slow speed verses high speed are more of personal preference and how you adjust the other variables in sharpening.

You will see many preferences but you should use what works best for you and is safe.

You would have more room between rim and guards that could be more of a hazard, maybe a problem with rests ,your steel wheel washers may fall outside the cushion washer/label and can put more stress in wheel, which is a potential hazard probably even staed on the label.

Re: Is it bad to put 6 inch wheels on a 8 inch grinder

#5

control will be the main benefit...

Bill Tindall, E.TN

>if you need it. The wheel construction and technique have way more to do with coolness than the grinder speed. But, at slower speed metal goes away less fast providing more control, if more control is useful. If not, use 8" wheels and grind faster with smaller scratches for a given grit size.