Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

mahogany finishing question

Posts

mahogany finishing question

#1

mahogany finishing question

McKay

>I need your help with a finishing question. I finished a green and green table using a pre-cat lacquer. I did not want the high gloss so I used pumice and rottenstone to knock down the sheen. The sheen now is great but now the pumice/rottenstone is in the pores of the mahogany and shows lighter. (I don't use filler as it makes the wood look like plastic.) Any ideas as to how to get the pumice to not show in the pores? Thanks in advance.

Re: mahogany finishing question

#2

Re: mahogany finishing question

Jim Dillon

>McKay,

Wild guess here. How about blowing out (or vacuuming) the pumace as best you can with an air compressor held at a slant, then applying a dark/red mahogany paste wax? I would try on an inconspicuous area first. Anyway, just a thought.

Jim

Re: mahogany finishing question

#3

Re: mahogany finishing question

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>You might try a stain. I'll bet the rottenstone would take the stain quickly, and wipe off of the finish. Try a test spot.