Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Ideas for pivoting bed on stage.

Posts

Ideas for pivoting bed on stage.

#1

JL

Ideas for pivoting bed on stage.

JL

>I've been asked to make a stage bed for the musical "I do, I do". The director wants the bed to pivot around a point that's roughly stage center.

My thoughts were to go ahead and make a plywood bed frame and place it on large casters. I was figuring on making a collar for the center of the frame. I was figuring on screwing a large round dowel (really 3" or so in diameter and about 10" tall or so) to a plate and screwing the plate to the stage. The bed frame would use the "dowel" as the center point and rotate around the dowel. There would be no direct load on the dowel.

Anyone else have any reasonable ideas? TIA.

Re: Ideas for pivoting bed on stage.

#2

Why not a piece of pipe?

Grant in Iowa

>I agree with the casters.

But, it seems to me a 3" dowel might be hard to source. Might be easier and cheaper to obtain two bearing blocks.. one for the stage and one for the bed... maybe 3/4" diameter piece of cold rolled steel linking the two. You can use retaining collars to keep the rod from leaving the bearing blocks.

Should be able to get what you need at a local industrial supplier or farm supply store...

FWIW,

Grant in Iowa

Re: Ideas for pivoting bed on stage.

#3

Re: Ideas for pivoting bed on stage.

Lee Schierer - McKean, PA

>I'm not sure the theater owner will be happy with screws in his stage floor and it won't lend itself to quick set changes. What about a large toggle clamp that lifts the pivoting end of the bed off the floor so all the weight is on the pin of the toggle clamp and the two casters on the other end of the bed. A rubber foot on the toggle should keep it in place so it pivots. The photo shows a small toggle clamp, but they make bigger ones.


Lee

Re: Ideas for pivoting bed on stage.

#4

Re: Ideas for pivoting bed on stage.

Bill Hammond, Oregon Coast

>Large floor flange with about a 5" nipple in it secured to the floor with stage screws and inserts. Mount another flange on the underside of the bed with a nipple that either fits into or over the floor nipple. You will have to lift the bed off of the floor nipple to move it but it will rotate nicely around it. Other option if lifting it off is out is to mount the two nipples to that they are about a 1/5" short of touching and have a piece of pipe inside drop down to make the joint. You would have to finagle a cord to drop and retract the inside pipe.

Another option if screwing into the floor is out is to mount fixed casters so that the bed can only roll in a circle. Imagine the four corners of the bed are resting on the circumference of a circle. Mount the caster so that it's tangent with that circumference.

hope this helps

Bill

Re: Ideas for pivoting bed on stage.

#5

Re: Ideas for pivoting bed on stage.

Eddie Pacheco; San Jose, Ca.

>Figuring that the play's budget may be a little low I came up with this idea. Agreeing that the stage floor is not a good place to drill holes, I was thinking about a 2' x2' piece of 3/4 plywood that has a 1 1/2" dia. pipe flange fastened to it at the center. This could be held to the stage floor with 2 strips of carpet tape. Screw in a 10" or so nipple of 1 1/2" pipe to the pipe flange for use as the pivot. Modify a standard cheap bed so that it has a length of board or plywood, with a hole in the center of it to fit the pipe nipple, spanning the center of the frame. Then use those furniture sliding disks on the feet of the bed to allow for it to better rotate when pushed around. This might work.

Re: Ideas for pivoting bed on stage.

#6

Cable Spool?

Thomas Skaggs, Foothills of Mount Level

>How about taking one of those wooden cable spools (the ones people make cheap coffee tables out of) and build the matress platform on top of the spool so that the spool would be hidden under the bed. Then put some casters on the bottom of the spool so that it pivots on the casters. The spool would allow a wider distrubution of load. Just a thought.

Tom

Re: Ideas for pivoting bed on stage.

#7

JL

Screws in the stage are not a problem.

JL

>Of course one of these days we'll have to replace the floor.

Re: Ideas for pivoting bed on stage.

#8

Oops, mis read the problem

Lee Schierer - McKean, PA

>Okay so I mis read the original problem. You wan tthe bed to turn about its center, not one end.

Make a large lazy suzan with two pieces of plywood with a circular v groove routed into the surfaces. Place a bunch of marbles or large steel ball bearings on the plywood in the groove, place the other piece over it so the upper grove is over the top of the balls and support the bed off the upper piece. If you want make a ball spacer cage out of thin ply wood to keep the balls spaced evenly and reduce the number of balls needed. It should work smoothly for the life of your production and remove easily when needed without any undue cost or holes in the floor.

Lee

Re: Ideas for pivoting bed on stage.

#9

Re: Screws in the stage are not a problem.

Bill Hammond, Oregon Coast

>If you use inserts rather than wood screws, when the insert is removed just fill the hole with plug glued in. Sanded flush it's as good as new.

Re: Ideas for pivoting bed on stage.

#10

Re: Ideas for pivoting bed on stage.

Pete in Holland, MI

>Mount 4 non-swiveling casters with the axles radiating from the pivot. They don't have to swivel, and if done right, will turn easily. Keep the spread wide, as I assume the bed will be used and you don't want it to tip.

Pete

Re: Ideas for pivoting bed on stage.

#11

Re: Ideas for pivoting bed on stage.

Bill Houghton, Sebastopol, CA

>Concur with the pipe flange and pipe nipple. If you've got a plumber involved with your theater group at all, you can probably get it free, but, if not, they're cheap enough. Or your local dump may have a recycle station where you could score them; or your local Habitat for Humanity may have a Re-Store (remodeler's thrift store - though ours doesn't carry plumbing fittings for lack of space).

If you use one of those Hollywood metal bed frames with the casters, you should be able to just mount the mating pipe on a plywood section under the box spring (with another pipe flange), and drop the box spring and mattress on top.

If the bed's not a fixed part of the scenery, you would need to remove the flange during set changes - but if you use inserts, as someone else suggested (or T-nuts if you can get under the floor), you could remove the screws in a few seconds with a cordless drill or brace with screwdriver bit if you need silence during set changes, and locate it accurately again for the next performance.

Re: Ideas for pivoting bed on stage.

#12

JL

Thanks all.

JL

>

Re: Ideas for pivoting bed on stage.

#13

Re: Ideas for pivoting bed on stage.

Bill Deak

>I have been in the same boat as you. I have been helping make the props for our local high school's spring musicals for the past 8 years. Our director every year wants us to make somehting spin on it's center. We always talk her out of it and just put casters on each leg and let the kids just spin the prop. Much easier for us to build, and it always has worked well.