ryobi ap12 planer blades
jared
>Anybody know where I can get some decent replacement blades for my Ryobi AP12 planer? I would prefer to directly mail order them from somewhere. Thanks Jared
Knowledge You Can Build On — Est. 1998
ryobi ap12 planer blades
jared
>Anybody know where I can get some decent replacement blades for my Ryobi AP12 planer? I would prefer to directly mail order them from somewhere. Thanks Jared
Re: ryobi ap12 planer blades
Rick W------WebKitFormBoundaryLAS+gJXDtwvtBHB2----
>I bought a used AP12 awhile back, and needed blades.I checked with Ryobi, and thought Ryobi's price was outrageous.
What I ended up doing was buying a set of Ryobi blades off eBay. I think I paid about $35.00, which was still high, but a LOT less than Ryobi.I also went to Sears and looked for a set of blades,since they used to sell a planer much like the AP12. I didn't find an exact match, but I did find that the #9_29459 blades had the same width and hole spacing. They were 13 inch blades, but I can grind them to the length of the original Ryobi ones.I think they were about $30.00.
I'm told that the Delta 22-562 blades for their planer will fit the Ryobi without modification.
My sharpening shop told me that they could resharpen disposable planer blades, but that it might cause problems with some planers because the knife wouldn't project far enough from the cutterhead after sharpening.I looked at my planer, and the knives project about 1/8", which should leave plenty of room after resharpening. You might try having your knives resharpened, if they can be done cheaply enough to warrant it.
Hope this helps.
Rick W