Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Help with wooden hinges?

Posts

Help with wooden hinges?

#1

Help with wooden hinges?

Barry Irby

>I have a post from a day or two ago about wooden hinges. I solved the problem with the brass rod by buying a number 30 drill bit. That worked well except that the bit had a regular point and it wandered, so I drilled all the holes with a 1/8 split point and then enlarged them with the slightly larger drill.

I probably should have tried some of the suggestions for turning rod itself into a reamer.

My lady friend was disappointed with brass pins. Thought I should be using wooden pins in wooden hinges. What's your thought on wooden hinge pins?

Started the process by Googling "making Ebony hinges". The guy has a great PDF on it. His were at about half the scale of mine, being 3.2 mm thick with a 2mm pin. Mine are 3/8 thick with a 1/8 pin. I tried rounding the with a patterning bit as suggested, but because mine were larger the bit I had was not tall enough. So I sanded them into submission with a drum sander and a pattern block. Worked well and much less intimidating that the router technique.

Another question. There is no discussion on his site about how to fix the pins in the hinges. Any suggestions?

Been working on this for two days and have made what looks like parts for 16 pairs of hinges in various woods. Got two more pair that I ruined when the bit drifted. Have to cut those off and redo the fingers and redrill them, so all is not lost.

Re: Help with wooden hinges?

#2

Re: Help with wooden hinges?

Steve in Denver

>The Incra web site has a brief demo (hinge crafter), looks like they just slide in a brass rod. Couldn't you cut the brass rod a bit shorter than the length of the hinge and fill the holes with a filler that matches the wood?

http://www.incra.com/video_demos.htm

Re: Help with wooden hinges?

#3

Re: Help with wooden hinges?

Clint Searl, at the base of Haycock Mtn

>Barry, you might try using bamboo skewers to make the pins from. I keep a couple sizes around, one of which is about an eighth. They would be as tough as any wood and can be easily scraped down if oversize.

Clint

Re: Help with wooden hinges?

#4

Re: Help with wooden hinges? *LINK*

Jim Dillon

>Barry,

Don't know if Rob Cosman's DVD "The Wood-Hinged Box" would help you, but it is SUPERB regarding how he constructed the hinge using 1/8 inch welding rod. He even shows you how to make a simple drill press jig to allow perfectly centered holes in the homemade dowel hinge. The making of his small box (and necessary jigs) is quite labor intensive, but he walks the viewer through the entire process - and it only takes him 1 hour 40 minutes 8-).

Jim


WC DVD review