Some recent work pictures
Fred West in West Chester, PA
>
Knowledge You Can Build On — Est. 1998
Some recent work pictures
Fred West in West Chester, PA
>
Re: Some recent work pictures
Fred West in West Chester, PA
>Sorry, I meant to write that this was a cherry built-in unit that we did about three months ago. Fred
Re: Some recent work pictures
Fred West in West Chester, PA
>This is also a cherry built-in that we did about six months ago and it encompasses two walls. However, I do not know how to post more than one picture at a time. Fred
Re: Some recent work pictures
Fred West in West Chester, PA
>Part of the same unit from above. Fred
Re: Some recent work pictures
Fred West in West Chester, PA
>One of two mahogany cupboards that we did for this client. The flame finial, the moldings and the shell at the bottom were all hand carved. Fred
Re: Some recent work pictures
Fred West in West Chester, PA
>The base of the cupboard with the flame grain veneer and the shell. Fred
Re: Some recent work pictures
Fred West in West Chester, PA
>Here is the swan neck, finial and fret work. Fred
Re:Extreme Ugliness not for Children :o)
Fred West in West Chester, PA
>Sorry for the picture but I was actually ASKED for this. :o) The beard is gone again but it was fun while it lasted. :o) Fred
nice work Fred!
Bill Sams
>
Very nice, Fred
Ellis Walentine
>You really are doing tasteful work, Fred. Keep it up, and be sure to post new pix here.
Cheers,
Ellis
Re:Extreme Ugliness not for Children :o)
Bart Goldberg
>Nice Work Fred - and Yes, I too am a Festool Junkie - but can't afford as much of their stuff - but I do have the Domino and love it.
Regarding your question about Bill's party - I unfortunately missed it this part summer, but plan to attend this summer.
Regards
Bart
Busy Beaver
Lee Schierer - McKean, PA
>Looks like you've been pretty bust. Very nice work.
Lee
You've been busy!
Thomas Skaggs, Foothills of Mount Level
>Fred,
What an impressive body of work. All looks very well crafted. The corner cabinet is a beautiful piece. I'd say you have quite a talent with wood! You are truly enriching your home. I am impressed!
Looking forward to seeing more work in the future. Thanks for the pictures!
Tom
Re: Some recent work pictures
Alan Young
>Fred- Very classy stuff....I have taken the liberty of of re posting your pictures in one link. Some of the pics were a tad on the dark side so I tweaked the brightness settings a bit in an effort to allow more details to show. Note: Clearly the last photo shows you have way too many tools for your needs.
Alan

"A cherry built-in unit that we did about three months ago. Fred "

This is also a cherry built-in that we did about six months ago and it encompasses two walls.

Part of the same unit from above. Fred

One of two mahogany cupboards that we did for this client. The flame finial, the moldings and the shell at the bottom were all hand carved. Fred

The base of the cupboard with the flame grain veneer and the shell. Fred

Here is the swan neck, finial and fret work. Fred

Sorry for the picture but I was actually ASKED for this. :o) The beard is gone again but it was fun while it lasted. :o) Fred
Re: Some recent work pictures
Fred West
>Alan, thank you for reposting all of these in one post as well as tweaking the brightness. Unfortunately photography is not yet one of my talents but I am trying to work on that as well. :o)
I misheard the old saying that a woodworker can never have too many clamps to can never have too many tools. It wasn't easy misinterpreting that saying but somehow I managed quite nicely. :o)
Fred
Re: Some recent work pictures
Fred West
>Thanks to all of you for your wonderful compliments. Fred
Re:Extreme Ugliness not for Children :o)
Fred West
>Bart, I am a huge Festool fan and user. Initially it was hard to get past the cost but once that happened I slid faster than humanely possible down the slippery slope. I think the two best dealers that I have worked with by far are TimmyC at festooljunkie.com and Bob Marino whom I think everyone here knows. These guys are both great. Fred
HEY FRED
George@Colonel's Workshop-Havertown PA
>Good Afternoon Fred,
That is some beautiful work indeed. How did you unify the color/shade of the cherry built-ins?
George
Re: HEY FRED
Fred West
>George, everything we do is by hand. We do not spray anything so we took as many samples as possible with all of the variations within the wood and started experimenting until we found what we liked. Wasn't easy but it was interesting and fun. Thank you for the compliments by the way. Fred
So, I'd like to know
Joanne in Pt. Pleasant, PA
>when the heck you sleep?!! Do you still have a full-time day job and only do woodworking part time? Wow! What a nice array of work you guys have done here! Keep it up! I too am finding I enjoy using hand tools more and more. I'd like to try some carving, but have yet to get to that. One of these days. Thanks for posting these. Love the cherry!
Re: So, I'd like to know
Fred West
>Joanne, this is all I am doing now and it is absolutely WONDERFUL. Best job I have ever had and love my boss though sometimes he looks a little scraggly in the mirror. :o) We will have to speak about the hand tool side as it is really wonderful. Fred