Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Something that is NOT fun in the workshop

Posts

Something that is NOT fun in the workshop

#1

Something that is NOT fun in the workshop

wilbur

>Tonight I was changing the plastic bag on my dust collector. I put a brand new bag on, and turned the dust collector on.

That's when I found out that the seam on the bottom of the bag had a 10" gap in it.

NOT fun.

Re: Something that is NOT fun in the workshop

#2

Bottom bag?

Mark Goodall - ATL - tooljunkie

>Uggghhhh...... hate when that sort of thing happens.

Do you have a plastic bottom bag and a filter on the top?

I could never get comfortable having only a plastic bag on the bottom, so I put the plastic bag inside the original canvas bag, protecting the plastic bag.

Happy Woodworking!

Re: Something that is NOT fun in the workshop

#3

Re: Bottom bag?

Barry Irby

>I had that happen. Fortunately my DC is out side in an exterior closet. The neighbor came over and told me I was blowing dust everywhere. Now I put the bag inside a thirty gallon trash can. It sits under the DC and is about four inches shorter than the bag, leaving me a little view of when the bag is full. Much easier to handle the can than the bag and not as many rips. It is ugly when it happens.

Re: Something that is NOT fun in the workshop

#4

Re: Bottom bag?

wilbur

>My dust collector doesn't have a bottom canvas bag, but Barry's 30 gallon trash can is a good idea. I'll probably swing by the borg on the way home.

Re: Something that is NOT fun in the workshop

#5

Knock on Wood

George@Colonel's Workshop-Havertown PA

>Hello Wilbur,

I've used a DC for ten years or more, and have re-used the original bottom bag, which is a very heavy guage plastic. Never experienced that problem, but will take a page from Barry's book. cheap, clean insurance against SWMBO nastiness.

George

Re: Something that is NOT fun in the workshop

#6

I wiil repeat what I have often said before......

Art Silva

>"If you let your bottom bag, whether cloth or plastic, exceed half full, you will seriously degrade the performance of your system". So empty early and often. I know it is a PITA, but it does help your unit breathe easier.

Re: Something that is NOT fun in the workshop

#7

Re: Knock on Wood

wilbur

>Hi George,

Ironically, this was the first time I had actually replaced the bag, instead of reusing it like you mentioned. I remember thinking that I should actually replace the bag, since the one I had been using was getting old.

What was that about no good deed going unpunished?

:@)

Re: Something that is NOT fun in the workshop

#8

A lot easier too!

Tony - Memphis

>I empty mine into a garbage bag, so I like to empty it before it is too full for one bag. I just place the bag (usually one of those large lawn/leaf bags) over the dust bag, then invert the two, then pull the dust bag out (mine are the Highland Hardware felt bags). Works real well.

Tony

Re: Something that is NOT fun in the workshop

#9

An Even Better Tactic, Tony

George@Colonel's Workshop-Havertown PA

>Good Afternoon Tony,

While I do admit keeping Art's half full bag half empty has merit, I enjoy my method better overall. When the lower bag gets half full, I mention it to JIMMY, my 25 year old 6'2" #7 son. A week later I mention it to SWMBO, who tells my #7 son to empty it the following week. By this time its about ready to explode, and the DC is adjacent to the laundry, and that proximity makes both SWMBO and #3 daughter nervous. Both get on Jimmy's case like angry, thirsty nats. I can only imagine their loving dialog because I'm in the shop and the DC drowns out all their noise. Jimmy always manages to get it emptied before the explosion(s).(His Mom,or his Sister, or the DC) Its pure entertainment, and can only happen with over-filled poly bags of sawdust and the kid lowest in the pecking order. :<)

After Jimmy moves out, I need to do what Art says.

George

Re: Something that is NOT fun in the workshop

#10

Re: I wiil repeat what I have often said before...

Glenn Madsen near San Francisco

>There is a 50 gal 'drop box'/pseudo cyclone in my system, so the main bag need emptying maybe every 6-12 months. Good thing, too, because so much stuff is piled up in front of it. Back where it hides, I have a 6' tall bag on the system, and it doesn't get in the way too badly there.