Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Determining value of a stash of rough cut Oak

Posts

Determining value of a stash of rough cut Oak

#1

Alan Young

Determining value of a stash of rough cut Oak

Alan Young

>My dad and brother have a stash of rough cut Oak Some are pieces are slightly bowed or twisted, most are pretty straight.

They range in sizes 1" and 2" thick by maybe 8" up to 13" wide. 100" long

They are trying to determine a value/price for these should they decide to sell them in auction. Any way to point them in a happy direction?

Thanks for suggestions.

Alan



Re: Determining value of a stash of rough cut Oak

#2

JL

Re: Determining value of a stash of rough cut Oak

JL

>I am presuming a couple of things. I am presuming that the stash was air-dried. I am presuming that the stash is white oak.

Around here the 4/4 would go for about $2-3/board foot and the 5/4 for $3-4. The 8/4 would go for a bit more. If it is quartersawn, the price would roughly double. The twisted stuff would go for a bit less.

Re: Determining value of a stash of rough cut Oak

#3

Re: Determining value of a stash of rough cut Oak

Guy

>I guess it would depend where you are located. I picked up a stack about half the quantity that you are showing, all 8/4 about 8 to 10 foot long for $20 for the lot. The guy next to me got a similar size pile of 4/4 for $15. All white oak. We are in Kentucky. Just be careful where and what type of auction, ask around where you live. Good luck!!!

Re: Determining value of a stash of rough cut Oak

#4

Usually the case at an auction......

Basil

>Doesn't bring much unless you have 2 fellows there with money in their pocket that want it bad.......then it still sells cheap.

Re: Determining value of a stash of rough cut Oak

#5

mostly depends on the grade?

Bill Tindall, E.TN

>The most important factor in determining its value is grade. I don't have a current market report but, for example, one year ago the wholesale price of not kiln dried white oak in the southeast was $1326 for FAS!F, $626 for #1 Common and $456 for #2 common. KD prices are about $400-500 higher. (price per 1000 bdft).

Individuals will pay more, but good luck finding someone that needs that quantity and is willing to pay for it. Be prepared to have a very difficult time unloading it all in a short time and getting much for it. 100 bd ft is a huge purchase for many customers unless the price is a giveaway. If it is not KD you have eliminated the large volume users (cabinet shops) that would enable you to unload a quantity at market price.

From what I can see in the picture it looks to be good widths (indicating it was sawed from reasonably large logs which means it may average #1 common if log run). It could have benefited from more sticks when it was dried, especially at the ends but overall it is acceptably straight.

I would suggest local advertising in 100 bdft lots and just be prepared for it to take some time to be rid of it. If you lay out some pieces and take a PIC I can provide an estimate of grade. Circle any defect that doesn't clearly show up in PIC- worm hole, knot, check. etc. If you wouldn't want it in a table top presume its a defect.

Re: Determining value of a stash of rough cut Oak

#6

$150-!85 for the stack

Clint Searl, at the base of Haycock Mtn

>

Re: Determining value of a stash of rough cut Oak

#7

Re: Determining value of a stash of rough cut Oak

Allan D

>The appearance of some of the pieces (bowed, cupped, twisted) makes me nervous that the entire lot wasn't dried correctly. The kicker is the big water tank and heavy timbers placed on top of the pile appear to be someone's efforts to straighten them.

Around here, in the Pacific Northwest where oak is relatively uncommon, I usually don't pay more than $1.50 to $2.00 a board foot for camp run (ungraded, unsorted) green oak. I just paid $3.00/bf for some 5/4 and 8/4 oak because I needed to get it drying for a project a year or two down the road. I regret paying that much after getting it home and stickering it and examining it more closely.

Even after careful stickering and drying I find I have a lot of waste and my furniture is built for my own use and I allow more knots and defects in my projects than a lot of people would. I would say at least 25% goes in the fireplace.