Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Looking for some bearings

Posts

Looking for some bearings

#1

Alan Young

Looking for some bearings

Alan Young

>I am working on a large Media Wall project. An HD TV will be covered by two sliding doors. The doors will be ply wood approx 30" by 25". These doors need to slide in a track. I want a set of bearings for the doors to slide on. I was hoping to find some ball bearings about 1/2 diameter set in a track. I can't seem to find what I am looking for. Any suggestions are welcome.

Alan


img

Re: Looking for some bearings

#2

Well Alan...

Thomas Skaggs, Foothills of Mount Level

>...I think we are all aware you lost your bearings a long time ago. ;-)

Happy New Year!

Tom

Re: Looking for some bearings

#3

Re: Looking for some bearings

HC Sakman

>Hi Alan,

Happy new year!

I had the same kind of idea for the same kind of sliding door configuration. Router bit bearings will work great on this. How the bearings fixed to the doors will require some creative engineering, but totally doable. (is that a word?;-)

Take Care,

Chico...

Re: Looking for some bearings

#4

Re: Looking for some bearings

Clint Searl, at the base of Haycock Mtn

>Assuming they're still available, the Accuride low profile undermount drawer glides might be OK.

Clint

Re: Looking for some bearings

#5

Sliding patio door bearings

Eddie Pacheco; San Jose, Ca.

>Hi Alan. Take a look at the various flavors of sliding door bearings that are available at the hardware store. There are metal and plastice varieties and some come with a a frame, with height adjustment, that you can mortise into the frame of your door. These bearings are rather inexpensive and in your light duty application should last forever. You can use standard alu. channel or a routed channel to guide the wheels.

Happy New Year, dude.

Re: Looking for some bearings

#6

Re: Looking for some bearings

Hamish

>Alan,

I think the wheel and track arrangements that you find on large sliding wardrobe might do the trick. They seem to offer a very smooth movement.

By the way, it looks like a nice project you are making. The invention of flat TV's is a real boon and much less cumbersome than of old. It would be nice to see some photos when you are finished.

Hamish.

Re: Looking for some bearings

#7

Hafele

Bill Tindall, E.TN

>Hafele will have just what you need.

Re: Looking for some bearings

#8

Re: Looking for some bearings *LINK*

al

>Will these work?


lee valley sliding door hardware

Re: Looking for some bearings

#9

Alan Young

Some helpful thoughts -except for that Skaggs guy!

Alan Young

>Now where was I going?