Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Finished a Spokeshave...

Posts

Finished a Spokeshave...

#1

Finished a Spokeshave...

Scott in Douglassville, PA

>Hi, all -

My wife got me the Lee Valley small spokeshave kit for Christmas a couple years ago, and sorry to say, it sat in the packaging until recently. Never could quite get the time/nerve/motivation up to start. Well, I found some nice wood on eBay a couple months ago - some curly red maple burl - and a few days ago, got started. Here's what I ended up with:





The kit went together smoothly, and is wonderfully engineered and presented. The maple didn't fight me (too much), so I got to use hand tools on all the steps, save for the drilling. Finish is some cherry red aniline dye followed by about five coats of SealCoat followed by about 10 coats of wax. It feels nice. More improtantly, it shaves from wispy thin to meaty thick with no effort. I attribute this to the wonderful iron supplied with the kit. I spent a good 90 minutes honing it, and while it's not a mirror polish (yet...), it's as close as I've ever gotten.

Now I need to start a chair.

Thanks for looking.

Scott

Re: Finished a Spokeshave...

#2

Chet Kloss

Very Nicely Done.

Chet Kloss

>

Re: Finished a Spokeshave...

#3

Nice job; bring on the spokes

Clint Searl, at the base of Haycock Mtn

>

Re: Finished a Spokeshave...

#4

And a ?...........

Richard Jones

>Scott,

Absolutely gorgeous.

Which size kit is that? Either way, do you like the size?

Thanks for sharing.

Rich in VA

Re: Finished a Spokeshave...

#5

Never mind, didn't read everything.......

Richard Jones

>Do you anticipate the small size to be adequate for most of your work?

Rich

Re: Finished a Spokeshave...

#6

Re: Finished a Spokeshave...

Bill White

>I would say that you NAILED IT. The color is super.

Bill

Re: Finished a Spokeshave...

#7

That is great!!

Howard Norman

>Makes me want to do one of those kits.

Re: Finished a Spokeshave...

#8

Way too nice to actually use! :-)

GalenV

>

Re: Finished a Spokeshave...

#9

Scott, that looks awesome!

Dominic in Buck's County PA

>Well done! And nice choice on the wood and finish as well.

See ya around,

Dominic

Re: Finished a Spokeshave...

#10

Re: Finished a Spokeshave...

Fred Davis

>That is a fantastic piece of wood, exactly the color wealthy women pay for in Furniture and entry doors.

FredD

Re: Finished a Spokeshave...

#11

Re: Finished a Spokeshave...

Frank Mutchler

>Very handsome addition to your kit! How much time do you have invested?

Re: Finished a Spokeshave...

#12

Re: Finished a Spokeshave...

George@Colonel's Workshop-Havertown PA

>Good Afternoon Scott,

I agree with all the others. I can appreciate the delicate hand work and admire the choice of color. It seems to me that making a tool is always more satisfying than buying one, especially if it comes out as lovely as yours. Congratulations.

George

Re: Finished a Spokeshave...

#13

OOPS! My kit was shipped to me 9/'06. Time.....

Art Silva

>to get off me Arse and make one.

Re: Finished a Spokeshave...

#14

Re: Never mind, didn't read everything.......

Scott in Douglassville, PA

>Mostly - my other spokeshaves are of similar size. Making spindles, I roughly size with a drawknife, then refine the profile and size with a spokeshave. I don't generally hog off too much material with shaves...

Re: Finished a Spokeshave...

#15

Time...

Scott in Douglassville, PA

>Hi,Frank -

Once I got going, the kit didn't really take too long. Maybe a few hours from rough to ready-to-shape. Shaping took an hour or so, finishing a day, maybe. The kit is really designed well, so that, if you're careful, it goes together smoothly.

Scott

Re: Finished a Spokeshave...

#16

Thanks, everyone!

Scott in Douglassville, PA

>I appreciate all the kind words. The kit was a lot of fun (I want another now...), and I'm looking forward to putting this thing to use.

Scott