Re: Windows Activation
Dave Paine
>As another reply stated, you should not need the registration key. If Windows is working, you can see this by going to Start - Control Panel which should open at the "General" tab. In the middle of the tab is the "Registered to" portion, which should show the version, e.g., Windows XP for my system, then below is the registration key.
You may need to call the 1-800 number. This will display a series of numbers/letters which is the Activation key. This is normally "automatic". It represents codes for the CPU, Video card, RAM, hard drives, etc.
I recently had to install new hardware, including the hard drive, and had to re-activate by calling the 1-800 number. Did not take long. Expect to hear an Indian accent.
As for what caused this, it is not easy to diagnose remotely. The activation data is saved in a special file on the hard drive. If this became corrupt or unreadable, it would trigger the need to re-activate.
Hard drives do have parts of the drive go bad. It is normal. Most of the time the operating system handles and by-passes the bad sectors. Every now and again the bad sectors can be an important part of a file.
I once had a hard drive with a bad sector in the data representing the folder "C:\Windows". As you can imagine if the folder cannot be read, then none of the files or sub-directories can be read.
I happened to own a special utility which allowed me to set the sector as bad and re-create the "C:\Windows" data. Saved me a lot of time in re-installing.