Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Purchased peg weirdness...or is it me?

Posts

Purchased peg weirdness...or is it me?

#1

Purchased peg weirdness...or is it me?

Ken Platt (granby, CT)

>Folks -

Normally I'd turn my own pegs. But time is in short supply, and this is just for a quick home project. So I dropped into Woodcraft and picked up a package of large shaker pegs. I assumed they'd mount with a tenon in a standard size hole.

Tonight I pulled out the pegs and had a look so I could drill the holes for them. (Who says I don't know how to celebrate New Year's, eh?) First thing I notice, the tenons are tapered. And not just a little, so the outside will fit tightly, but tapered a lot. I pull out my digital calipers, and the bottom of the tenon is 0.69 inches, the top 0.79 inches.

I'm mystified. First, why would the tenon be so tapered? Do they expect people to drill a tapered hole somehow? Second, why the weird dimensions? I'd assume anyone buying these pegs would have a 3/4 inch bit, but that's too loose at the bottom, and not big enough at the top. I realize that 13/16ths or 25/32nd bits exist, but it's certainly not sizes that most would have sitting around.

Am I missing something? How are they expecting these pegs to be mounted? I found I can use the dremel to enlarge and taper the hole a bit. It takes about a minute per hole, and I only have ten holes. But I can't help thinking that I must be missing some simple answer....

Anyone? Thanks -

Ken

Re: Purchased peg weirdness...or is it me?

#2

Re: Purchased peg weirdness...or is it me?

Howard Norman

>A quick calculation shows the 0.79" hole to be almost exactly 2.0 cm. I suspect the pegs were made to metric dimensions.

Re: Purchased peg weirdness...or is it me?

#3

Re: Purchased peg weirdness...or is it me?

Charlie Self

>Almost certainly metric, made in China or someplace else that prefers not to match tools to the desires of their biggest customers.

The taper, as I recall being told by a marketing type one time, is to allow room for glue in the hole. Lots of glue.

Re: Purchased peg weirdness...or is it me?

#4

Re: Purchased peg weirdness...or is it me?

Clint Searl, at the base of Haycock Mtn

>Maybe the intent is to kerf the tenon and wedge it. No glue needed. That sounds Shakerish to me.

Clint

Re: Purchased peg weirdness...or is it me?

#5

Grind a spade bit to match the tenon

Gary Camp, Bend, oregon

>You could have a near perfect fit, log as you don't drill to deep.

glc

Re: Purchased peg weirdness...or is it me?

#6

Re: Purchased peg weirdness...or is it me?

Ken Platt (granby, CT)

>That thought occurred to me also, but the taper is way too much to be able to spread the tenon into snugness that way. I think both of us are giving them too much credit....

Ken

Re: Purchased peg weirdness...or is it me?

#7

Re: Grind a spade bit to match the tenon

Ken Platt (granby, CT)

>It ended up being easier to carefully mount the pegs in my lathe and narrow the top of the tenon to 3/4". I drilled a 3/4" hole in scrap, pushed the tenon in as far as it would go, ran a pencil line around at the spot where it wedged in the 3/4" hole, and then turned down the fatter portion to the thickness at the line. So now I can put them in a 3/4 " hole.

It really wasn't too big of a deal, but it was irritating since it somewhat defeated the purpose of buying the things.

Oh, well, next time I'll just make my own and feel good about it.

Ken

Re: Purchased peg weirdness...or is it me?

#8

Glad You Took It Down a Peg, Ken

George@Colonel's Workshop-Havertown PA

>