Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Stud finders.

Posts

Stud finders.

#1

Stud finders.

Virgil

>Anyone own a stud finder that will find a joist through hardwood flooring and sub floor? If so please post the model # here. I have a squeaky spot in my hard wood flooring upstairs that I want to put a few screws in. Down stairs over the crawl space was easy. Thanks.

Re: Stud finders.

#2

Re: Stud finders.

Barry Irby

>I take it this is a second floor room? Any chance there is a room below with a wall that exactly matches one upstairs? You could go downstairs and use a stud finder or even a magnet or compass to find a nail in the ceiling. Then you could measure from the common wall and transfer the measurement to the upstairs floor.

Re: Stud finders.

#3

Stud finders: ;-) I could use one of those!

Joanne in Pt. Pleasant, PA

>

Re: Stud finders.

#4

Re: Stud finders.

GalenV

>I have a cheaper Zircon that is only listed for 3/4 depth but ACE hardware here has the Zircon i520 that is claimed to find studs or joist through 1 1/2". It also will find live wires and metal pipe.

My cheaper unit seemed to find deeper as I thought I found a stub in down stairs bath wall and after drilling found it was a 1 1/2" copper drain line from upstairs set back in mid wall. This was through tile wall and blue board. That was a fun hole to patch!

Re: Stud finders.

#5

Jason Roehl in Lafayette, IN

I can't ever get them to work...

Jason Roehl in Lafayette, IN

>...they just start beeping and flashing lights as soon as I turn them on. ;^)

Jason

Re: Stud finders.

#6

Re: I can't ever get them to work...

Joanne in Pt. Pleasant, PA

>:-)

Well, of course they do! :-)

Re: Stud finders.

#7

Tghey Have Run After Me for A Long Time

George@Colonel's Workshop-Havertown PA

>So, I've been chaste for years. :<)

George

Re: Stud finders.

#9

Hey, keep it clean!

Bill Houghton, California cold in Sebastopol, CA

>This will be a test, Joanne - how many e-mails you get from Centralians with the subject line, "you found me."

Re: Stud finders.

#10

Hit & miss at best.

steve mackay

>

Re: Stud finders.

#11

Re: Stud finders.

paul mayer

>I just tried it with my zircon i500 and the results were highly inconsistent. This is the first test that I have seen this tool fail. It is incredible at finding studs and hot wires with great precision. Far better than any other one that I have used.

Re: Stud finders.

#12

Re: Stud finders.

Justin Szeliga

>You could look on the ceiling below & find either a panel seam in the drywall or a row of nails if any are telegraphing through the spackle & then measure from the nearest wall & transfer your measurements to the upstairs room.

Peace

Justin