Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Any woodworking goals for the New Year?

Posts

Any woodworking goals for the New Year?

#1

Any woodworking goals for the New Year?

Chris Knob

>Mine is to work in the shop without destroying my reconstructed back any further.

Re: Any woodworking goals for the New Year?

#2

Re: Any woodworking goals for the New Year?

John K Jordan

>I resolve to vacuum the shavings from under my lathe no later than June, whether needed or not.

Re: Any woodworking goals for the New Year?

#3

Finishing THIS YEAR'S Christmas presents!

Neal praying for rain in San Jose

>

Re: Any woodworking goals for the New Year?

#4

Re: Any woodworking goals for the New Year?

George@Colonel's Workshop-Havertown PA

>Good Evening Chris,

Besides getting all that glue and sand paper off my putty knife, my schedule for the next year is pretty flexible. I will complete the Master Bedroom Suite as soon as I can use God's sunlight to darken the cherry bed--and, that may be several months before I'm comfortable working outside. With that 20 month project completed, I am looking to do more furniture. My #2 daughter Lizzy has asked me for a kitchen table to sit Hubby and her three kids. Of maple or birch, and not fancy--just one which will last a generation or two. My #3 son mentioned a bed for his little boy, to last as he gets bigger and bigger. (They will surely have more kids.) For me, I'd like to do a chair to break in my Radial Drill Press and complement work on Lizzy's table. I need one of the kids to ask me to build them a tall clock, and I'd begin that tomorrow. Right now, the shop is silent and I've no firm requests other than to install a dead bolt lock for #2 daughter and her helpless hubby. Until one of my last two kids moves out and leaves an empty room, I have no house capacity for more furniture here. And bowl turning bores me to death--which I am close enough to as it is.

George

Re: Any woodworking goals for the New Year?

#5

JL

Re: Any woodworking goals for the New Year?

JL

>One cherry settee.

A cherry occasional table (or maybe a coffee table) that sort of matches.

I want to try a butler's tray with a table base to set it in.

Maybe a Prairie Settle.

Whatever else strikes my fancy.

Re: Any woodworking goals for the New Year?

#6

Yes !! To actually do more woodworking.

Ray Carson, Lawrenceville, NJ

>

Re: Any woodworking goals for the New Year?

#7

Keep All My Fingers Attached To My Hands

Ken Oakley-Sunny St. Cloud, Fla.

>

Re: Any woodworking goals for the New Year?

#8

Re: Any woodworking goals for the New Year?

Clint Searl, at the base of Haycock Mtn

>1. Strip and refinish an Eastlake style chest of drawers

2 Pair of bedside night stands

3 8 or 10 drawer builtin chest/dresser

4. Free-edge maple slab coffeee table

5. Free-edge redwood slab coffee table

6. Flatten and finish 52" diameter maple table top

A cowboy's work is never done.

Clint

Re: Any woodworking goals for the New Year?

#9

Re: Any woodworking goals for the New Year?

Winnemucca Lynn

>A harp for me and a dollhouse fpr a friend. Anything more will be given to the local hospital auxiliary to be sold to raise money for them. And to figure out where I can put a mini lathe. Now I just need for it to start getting warm so I can start working in the shop. Lynn

Re: Any woodworking goals for the New Year?

#10

Re: Any woodworking goals for the New Year?

Steve in Denver

>Job being eliminated end of March, no job = very limited woodworking, FIND A JOB!!!

Re: Any woodworking goals for the New Year?

#11

Learn to spray finish

mdclor

>

Re: Any woodworking goals for the New Year?

#12

Re: Any woodworking goals for the New Year?

Don Orr

>I'm planning on building my first real shop cabinet. I got the Kreg jig this past Spring and want to use it for something useful. The cabinet will be used for my planer and be on wheels of some sort so I can mill some wood to finish my workbench that has been in progress for over 3 years. I also need to finally get my dust collector set up the way I want it and get it out of my way. Lots of other things but these should keep me busy all winter and beyond.

Happy New Year !

Re: Any woodworking goals for the New Year?

#13

Re: Any woodworking goals for the New Year?

Wayne (Atlanta)

>To get back to woodworking in earnest this year. I've made a few little things in the past year or two, but nothing of significance.

Already on the list is to finish the game cabinet and then on to a bed for my wife and I. And my youngest daughter wants me to redo her closet.

Could be a busy year.

Wayne

Re: Any woodworking goals for the New Year?

#14

Re: Any woodworking goals for the New Year?

Dan Donaldson

>Locate my table saw. I know that there is one somewhere in the shop ;-)

Re: Any woodworking goals for the New Year?

#15

Re: Any woodworking goals for the New Year?

HC Sakman

>Hi Chris,

Long time no see... As I understand, you hurt your back. I rather be a "whimp" than no being able to move at all. How did you hurt yourself?

Happy new year...

Chico...

Re: Any woodworking goals for the New Year?

#16

Chico my dear friend!!

Chris Knob

>Hello to you. Hurt the back delivering a piece of furniture. I was climbing a client's stairs, on the bottom of an armoire, when it slipped from the grip of my helper who was on the steps several feet above me. I basically destroyed the disks between L4 and L5 contorting myself in an effort to save this piece of furniture from damage (I did). To be honest, my lower back was probably well on its way to destruction from abuse over the years. My wife has always told me I should be proud of the record setting acts of stupidity I have committed in service of lifting and moving. I tried everything...epidural steroid injections, nerve blocks, TENS units, physical therapy until I finally relented and went under the knife...a few times. Thank God, what they did seems to have finally worked.

It got screwy and stupid in the interim. I was on very high doses of narcotic pain killers for a long time and I discovered they kill all kinds of pain...emotional pain as well as physical. As I was sinking deeper into feeling sorry for myself due to my new onerous limitations, an extra pain pill here and there numbed the depression. Getting off them was not for the faint of heart or the novice. I had to check into a rehab/detox and the initial 5 days were like nothing you could ever imagine. The individuals who work in the detoxification area of recovery are angels...I would have never made it without their care and love. I've been sober and back healthy for a while now and it feels so good to have the gift and blessing to be back among my friends here at WC.

Re: Any woodworking goals for the New Year?

#17

Re: Chico my dear friend!!

Hikmet C. Sakman

>Well, it sounds like you're back on track and well. That's all it matters.

Good to see you back.

Chico...