Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Mabry's Mill fretwork portrait *LINK*

Posts

Mabry's Mill fretwork portrait *LINK*

#1

Mabry's Mill fretwork portrait *LINK*

David G. Sparks

>Here's a picture of my latest fretwork project. I cut out three of them at a time to give as Christmas gifts. I think it took about 18 hours to complete them. The mill is on the Blue Ridge parkway about an hour from my home.


http://flickr.com/photos/30988179@N04/3148655266/

Re: Mabry's Mill fretwork portrait *LINK*

#2

Re: Mabry's Mill fretwork portrait

Richard Jones

>Beautiful!! BB? What's the background? What kind of saw and blade?

Again, very nice.

Rich in VA

Re: Mabry's Mill fretwork portrait *LINK*

#3

Re: Mabry's Mill fretwork portrait

George@Colonel's Workshop-Havertown PA

>Good Afternoon Davis,

I always admired the skill used in creating thast type of relief. It looks wonderful to my eyes. I can easily understand why it takes so long to create one. The hand/eye coordination and visual acuity simply asthonishes me. I've never been well endowed with that kind of talent.

George

Re: Mabry's Mill fretwork portrait *LINK*

#4

Re: Mabry's Mill fretwork portrait

David G. Sparks

>Hi Rich,

Thank you. I used my 30" Excalibur with 2/0 spiral blades. Most of the blades were the Flying Dutchman "new" spiral type from Mike's Workshop. I ran out of blades toward the end and used Pegas 2/0 spiral blades to finish. The Pegas blades cut a little more aggressively and faster than the Flying Dutchman ones. This is the kind of project that you kinda hate when you're cutting it but glad you did when it's over.

Jeff Zaffino developed the pattern. He is an awesome designer!

Re: Mabry's Mill fretwork portrait *LINK*

#5

Re: Mabry's Mill fretwork portrait

David G. Sparks

>Thanks for the kind words, George. Hope my eyes hold up.

Re: Mabry's Mill fretwork portrait *LINK*

#6

Re: Mabry's Mill fretwork portrait

David Sparks

>Hello again Rich,

I forgot to tell you that it is Baltic birch. The background is black felt. I bought the frame from Walmart. They have good prices, but the frames are often banged up.

Re: Mabry's Mill fretwork portrait *LINK*

#7

Re: Spiral blades

GalenV

>David

Don't know how you did that. Not much wood left to hold that piece while cutting!

Very fine work!

Only time I used a spiral blade it cut in one direction while I was "thinking" it should cut in another!

Now my scroll saw collects dust.

Galen

Re: Mabry's Mill fretwork portrait *LINK*

#8

Re: Spiral blades

David Sparks

>Thanks, Galen. This is only the second project where I've used spiral blades. I hated them at first because you can mess up in every direction. I'm getting used to them slowly. The scary part about this type of fretwork is how I use a torch to burn the fuzzies off the back side of the pieces. It helps speed the cleanup and is less damaging than sanding for the really delicate parts, but I'm always afraid the piece will catch fire. You have to keep the torch moving.