Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

marking scratch stock

Posts

marking scratch stock

#1

marking scratch stock

Rob Ring

>I want to make a scratch stock to put a bead on a table apron. I plan to use an old hacksaw blade as the cutter. Question - what's the best way to cut the hacksaw blade? Another hacksaw (duh)? A grinding wheel on a dremel? If I do any type of grinding on the blade, either to cut it or shape it, do I need to be careful not to overheat it and lose the temper? Would a hacksaw blade even be hardened to begin with?

As I type these questions I'm struck by how stupid they seem, but metal is not my typical material so any help is much appreciated.

Thanks.

Rob

Re: marking scratch stock

#2

Re: marking scratch stock

Rob Ring

>nevermind - I gave my metal snips a try and it worked like a charm.

Re: marking scratch stock

#3

Re: marking scratch stock

Dan Donaldson

>Most of the hacksaw blades I have played with are only hardened on the teeth edge. Grind that off and you can file what is left. Scratch stock doesn't have to be extremely hard.