Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

brass hardware

Posts

brass hardware

#1

brass hardware

robert davis

>does anyone know of a long lasting coat for polished brass on a door? i have tried spray can of stuff sold for that purpose and clear lacquer. neither last bu about a year. the door does NOT get any direst sun. only outside weather. thanks

Re: brass hardware

#2

Re: brass hardware

Fred Davis

>Do like the Navy does,get a can of brass polish and when it starts to dull give it a going over.

works like a charm.

lacquer finish on brass hardware is a fairly recent use and not good for the long haul.

FreD

Re: brass hardware

#3

Re: brass hardware

Clint Searl, at the base of Haycock Mtn

>You might try a clear epoxy, but the most practical approach is Fred's suggestion. Brasso is cheap, fast, and effective.

Clint

Re: brass hardware

#4

Dont know if this would work but

Chris Knob

>...there are water based crystal clear exterior spar varnishes. I don't know how well they would adhere to metal. Try it on a scrap brass hinge. The stuff is expensive though.