Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Wow, I finished something!

Posts

Wow, I finished something!

#1

Wow, I finished something!

Stephen Kirk

>I must have started these radiator covers last year about this time. This and that got in my way and I'm just now finished. Wood is poplar, slats are MDF (won't move around on me). Construction is all M&T (drilled and chiseled but now I have a mortiser!). Slats just sit in a slot with spacers so things can move a tad if needed. Top is fastened on with figure 8 desktop fasteners (should also allow a bit of movement). I also only fastened the top along the front rail and the middle of both sides, so hopefully I won't have any movement issues with it. These are for a friend of mine and are going over hot water radiators (I don't think wood would be stable over steam heat). Project was primed and then got 3-4 coats of gloss white.

Now I just have to deliver them!


img

Re: Wow, I finished something!

#2

Oh yeah, also got these done

Stephen Kirk

>Fun little project. Walnut over poplar. My dad got me one of the domino jigs last year and this was my first chance to use it. These were a Christmas present for my niece. She instantly stood them on end and knocked them down, as your supposed to do with dominoes! I started by resawing some walnut down, face glueing it to the poplar then planing each side down to the desired thickness (in place of getting a veneer). Then attach the template, use the nifty bit they provide and drill down through the walnut into the poplar. Sand and add a few coats of poly.


img

Re: Wow, I finished something!

#3

Re: Wow, I finished something!

Fred Davis

>Very nice looking covers Steve, but given the chance , you may be amazed at what happens to MDF near moisture.

FredD

Re: Wow, I finished something!

#4

Re: Wow, I finished something!

Stephen Kirk

>Yeah, just to be safe all 4 sides are primed.

Re: Wow, I finished something!

#5

lines

Charles Yawn

>Stephen, did the template/drill bit kit provide a way to cut the straight lines on the pieces? Charles

Re: Wow, I finished something!

#6

Re: lines

Stephen Kirk

>Yeah, it gave markings for where to cut the pieces apart. As for the middle lines, you could do is when the pieces are still in a strip or after, like I did. I just did a score cut on the table saw (sleds are a wonderful thing) or you could use the router with a v-groove bit for a nice look.