Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Christmas Cromwell tables

Posts

Christmas Cromwell tables

#1

Christmas Cromwell tables

mckay

>I made these five Cromwell tables for my children. Four of them are QSO and one is Mahogany. The top spins to have the legs hold up the leaves. Really fun to make. I also made a Green and Green style end table for the better half. It is also made of Mahogany. I treat the mahogany with sodium hydroxide to bring out the natural red of the mahogany. The buttons are ebony and it is finished with pre-cat lacquer.


img

Re: Christmas Cromwell tables

#2

Re: Christmas Cromwell tables

mckay

>here is the up and the down position of the tables.


img

Re: Christmas Cromwell tables

#3

Green and Green End table

mckay

>The end table is not yet finished as you can see from the different color on the drawer front. Just could not get everything done for yesterday.


img

Re: Christmas Cromwell tables

#4

Re: Christmas Cromwell tables

Wayne (Atlanta)

>How do the tops spin? Are they set on the frame with a dowel or is there a mechanism to control the rotation and hold them to the frame?

Thanks,

Wayne

Re: Christmas Cromwell tables

#5

Yes, My Question Also

George@Colonel's Workshop-Havertown PA

>Good Afternoon Mr or Ms McKay,

I like the tables very much, nice job.

George

Re: Christmas Cromwell tables

#6

spin mech.

mckay

>I have taken flat bar stock, tapped the center with 1/4-20 tap, drilled four holes in each corner and mortised the bar stock into the underneath side of the top. There is a cross piece that goes from two of the legs. (spans between the two legs)The cross piece is drilled with a loose hole for the 1/4-20 hex bolt to slide through. The bolt is then tightened finger tight to the top. If it is turned a lot, then loc-tite is used. If not spun much, then just finger tight. All of the legs are on a 60 deg. angle as are all of the joints on the top.