Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Lacquer finish question?

Posts

Lacquer finish question?

#1

Lacquer finish question?

Barry Irby

>I have been finishing some small boxes. Made eight for Christmas gifts. I made a book matched pair with walnut crotch wood in the top. On one of them I had some sort of blemish in the finish and I sanded through it in a spot. The spot showed as a ragged edge shaped like one of the Greek Isles. I tried sanding some more. More coats. Satin lacquer instead of gloss. All I managed to do is change the shape of the ragged line.

Is the answer to remove the finish from the entire top and start again?

Re: Lacquer finish question?

#2

Dale Lenz

Re: Maybe not what you want to hear

Dale Lenz

>Barry,

I would put some one pound cut of shellac on the bare spot, wait 15 minutes and then apply 3-4 coats of lacquer, 10 min. apart. Wait at least over night more if you have time before finishing the finish. Seems to me the longer I wait to work the lacquer finish the less chance I have of sanding through the lacquer. Have assumed, the longer the lacquer cures the harder it gets, that's been my experience.

Merry Christmas

Re: Lacquer finish question?

#3

No problema

Clint Searl, at the base of Haycock Mtn

>Cover the top with a layer of paper towels or wipes and saturate with lacquer thinner to soften and remove the finish completely. Sand if necessary. Redo the lacquer.

Clint

Re: Lacquer finish question?

#4

Thanks, Clint, Exactly what I did.

Barry Irby

>Had to move it along, Christmas is coming. Would have tried the shellac But did not want to experiment and it had to match it's twin. And, it worked.

Re: Lacquer finish question?

#5

Re: Thanks, Clint, Exactly what I did.

Clint Searl, at the base of Haycock Mtn

>And Santa gets high from the lacquer thinner fumes. Happy Holidays.

Clint