Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Thanks for Getting it Square

Posts

Thanks for Getting it Square

#1

Thanks for Getting it Square

Ed Beck

>Thanks to everyone who helped me with my "Can't get it square" post.

I found a couple of vids on YouTube that show one of the "Checking your square" methods, as well as a third method.

Also a vid of taking a piece of lumber from start to finish.

You Tube Videos

3-4-5 and the parallel line method

http://www.youtube.com/watch?v=DxNriQsxalo

How to square lumber

http://www.youtube.com/watch?v=8uHhRRhUREU

(Why do one face on your jointer and the other on your planer?)

Re: Thanks for Getting it Square

#3

Yes, and now I know what I'm using my birthday for

Ed Beck

>My squares are not square, except for one of them.

So using the advice from everyone I nibbled away at the two short ends with a bench plane until everything was nice and square.

The good news is that this was a practice piece for some very nicely figured cherry, which in turn is a "practice piece" for jewlery boxes for my daughters using irreplacable wood (left over from our kitchen table which I built, so they'll always have a piece of home).

The really good news is that I found it out now, so I can use my birthday coupon at Woodcraft to get a square square.

Re: Thanks for Getting it Square

#4

Square recommendation

Bill Tindall, E.TN

>I find a 12" and a 4" Starrett combination square both accurate and handy.