Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Bubbles in lacquer question?

Posts

Bubbles in lacquer question?

#1

Bubbles in lacquer question?

Barry Irby

>I have made a number of boxes out of various woods. In several of them I made my own plywood for the lids. Crotch walnut on one side, pain walnut on the other and 1/8" plywood in the middle. The crotch side is giving me a fit. Bubbles keep appearing in the lacquer. Spray can Deft Lacquer. I have put about four coats on the tops and the bubbles reappear. Is it possible there is some type of void in the laminations and air is escaping? What to do? Can you burst the bubbles with a pin while they are wet?

Re: Bubbles in lacquer question?

#2

Re: Bubbles in lacquer question?

Ken Oakley-Sunny St. Cloud, Fla.

>Apply hot air from a hair dryer or heat gun while still wet.That should pop the bubbles. My experience has been bubbles will occur if the piece has been exposed to any kind of silicone spray.

Re: Bubbles in lacquer question?

#3

Re: Bubbles in lacquer question?

Chris Knob

>Do they re-appear in the same place? Are we talking bubbles large enough to pop!??? I have seen bubbled lacquer but pin bubbles not bubblegum bubbles.

All of the bubbling in quick drying finishes I have dealt with has been temperature related, that is the temperature of the surface is too warm or in the case of forced drying, the temperature of the drying air is too warm. I need a better description of what you're seeing.

Re: Bubbles in lacquer question?

#4

Re: Bubbles in lacquer question?

Barry Irby

>These bubbles are less than a 1/16" in diameter. Maybe a 1/32". The temp in the shop is probably in the low 60's and maybe in the middle 60's in the "drying" room. (my shop has two rooms, one where the tools are and one for storage, I am spraying them in the shop and moving them to the other room.) RH is pretty low even here in humid southside VA.

Re: Bubbles in lacquer question?

#5

How many?

Chris Knob

>Hundreds or just a few? The reason for my question is you may never figure out why...maybe some strange reaction between chemical or resins in the wood and your finish...but if the problem is infrequent, perhaps they can be sanded and rubbed out once you have built up enough of a finish.

Re: Bubbles in lacquer question?

#6

Re: Bubbles in lacquer question? *LINK*

Dave Anderson (PacNW)

>Read Russ fairfield 's article on using Lacquer. It will really help .


http://www.woodturnerruss.com/FSOriginal11-Lacquer-1.html

Re: Bubbles in lacquer question?

#7

Re: How many?

Barry Irby

>A few, three or four larger ones and two or three tiny ones. They reappear with each coat and I think they are in the same places.

Re: Bubbles in lacquer question?

#8

Re: Bubbles in lacquer question?

R. Gryder

>Barry,

Sounds like silicone is causing the problem. I solved the problem once by applying a thin coat of shellac before applying lacquer. Also, if you use a spray gun to apply lacquer you can get at a material called fish eye killer. Available at auto paint stores. Most places that sell wood finishes don't keep it. R.

Re: Bubbles in lacquer question?

#9

Be careful with "Silicone fish eye killer"

Chris Knob

>Silicone fisheye killers solve the spot contamination problem by contaminating your entire system with silicone. They should be avoided

Re: Bubbles in lacquer question?

#10

Too big a hurry, Christmas is coming.

Barry Irby

>I have gotten six out of eight boxes adequately finished. Part of the problem is I am pushing this. Recoating sooner than I ordinarily would because Christmas is coming. This is going to happen, but I am realizing I am putting on thicker coats and causing problems because I don't want to take the time to do many thinner coats. I think one more careful coat will whip the other two. Lets home, because one of the is one of a pair of matched boxes.