Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Evening the color with gel stain

Posts

Evening the color with gel stain

#1

Evening the color with gel stain

Gary Evans Tallassee, TN

>Hi all,

I'm on the final stages of refinishing this walnut-veneered cedar chest for my friend. After applying the first coat of gel stain, I still have a couple of light colored stripes on the top, I assume where the veneer is taped together.

My plan is to apply a second or third coat of the stain just to the stripes to blend the color with the rest of the chest. This is the first time I've used the gel stain and I'm really impressed with the ease of application, as well as the evenness of the color.

Am I proceeding in the right direction?

Thanks,

Gary

Re: Evening the color with gel stain

#2

I hope so

Chris Knob

>If you have stripes from veneer tape you might have residual adhesive interfering with staining. If that's the case, you have quite a difficult spot staining challenge. The fact that they probably run perpendecular to the grain won't help matters either. A picture might help with the analysis

Re: Evening the color with gel stain

#3

Re: I hope so

Gary Evans Tallassee, TN

>I hadn't thought about the adhesive being an issue, Chris. I know I haven't gone through the veneer. Fortunately, (I think) the stripes on this one run with the grain. I think if I can just get them a little darker they'll blend in fine. My only concern is whether I might make them too dark.

Thanks,

Gary

Re: Evening the color with gel stain

#4

Re: I hope so

Chris Knob

>I'm not fully sure I understand the nature of the problem Gary. You said you refinished this piece? The veneer you are talking about, is it the original veneer or veneer you attached and are now staining? You said where the veneer is taped. That's where I'm confused. Applied veneer tape should be refered to in the past tense if you're at the finishing stage. What exactly has been done to the area in question from start to where you are at present?

Re: Evening the color with gel stain

#5

Re: I hope so

Gary Evans Tallassee, TN

>Hi Chris,

This is a piece that I'm refinishing. I'm assuming that the visible stripes are where the veneer was originally joined. I don't know that for sure. The stripes showed up during finish sanding and continue to be lighter in color after the initial application of stain.

I'm going to try coloring just the stripes here in a few minutes and see what happens.

Gary

Re: Evening the color with gel stain

#6

Ahhhh so they are lines

Chris Knob

>...probably the result of creep where the edges of the veneer have pulled away from one another. You are trying to stain glue then Gary...an easier task if it's hyde glue but hell if it's anything else. You might do better by going to an art store and buying colored markers. They sell them in a tremendous variety of colors and from very fine tips to broad widths. I have an assortment in a variety of honey browns that I use to spot stain and do finish repair. They are a very valuable part of my finishing tool kit. Color in the lines carefully, let the marker line dry, and apply a finish. Avoid alcohol based finishes like shellac because some marker ink will be removed by alcohol.