Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

Posts

Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#1

Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

paul in AZ------WebKitFormBoundary8B+wQd2rhLPpKyZn

>A friend wanted a fireplace mantel which sounded like it could be a fun project. I asked her to sketch out what she wanted and we'd talk about it.

Well, she showed up with a gorgeous, incredibly heavy plank of wenge, a full 2X12 inch by over 6 feet long. All she wanted was to have it cut to length and surfaced to be used as the top. This i did. I hate to think of how she will attach this monstrous weight as a cantilevered mantel but her husband said he'd do it. Now her problem.

Anyway, she gave me the cutoff: a chunk 2 X 12 X almost 2 feet long.

My Q: is what on earth I could use that for. The wood is so hard I shudder to think of the tool abuse in working with it. If I was a turner I could make enough pens to supply the Govt. I'm not.

It is one lovely slab of wood that looks for all the world like ebony. What could one use that for? I'm not apt to fiddle with "little" things.

So I'm asking for ideas.

------WebKitFormBoundary8B+wQd2rhLPpKyZn

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#2

Wenge Christmas gifts?

Scott in Montana

>Obviously my first suggestion is that you send the whole piece to me as a Christmas present. Should, after long consideration, you decide not to do that... welll....

Wenge was often used for chisel handles as it takes the abuse of being pounded on. Since you're not a turner, I might consider making mallets. One of which you would send to me as a Christmas present. Hmmmmmm... a developing theme here.

Happy Holidays!

Scott in Montana

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#3

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2

Dave Paine

>I just bought my first piece of Wenge. My intent was to use this as accent/contrast in my latest projects, one of which is in the attached file. A custom frame make as a gift. This is the "before and after" oiling to show another friend the differt colour of natural wood vs oiled wood. Right side just oiled in this picture.

I was surprised at how many splinters I managed to receive while working with the wood, even after planning and sanding. If this were to be used in a piece to be handled, it would need a good film covering to enclose the wild grain.

The Wenge is the dark stripes in the middle of the frame.

Easy to tear when being routed/planed.

It is fairly dense, but I did not have problems cutting on the table saw, or planing. My piece was onluy 4/4 x 4in.

A solid Wenge mantel is too dark for my tastes.

Your cut off piece is a nice contrast wood for e.g. chess board along with some ash, hickory,maple, etc..


img

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#4

Re: Wenge... ideas?-

paul in AZ-

>Other than good suggestion of the mallet heads the thought of using thin strips of wenge as a color accent such as you did was the only use I could come up with. Nice frame.

I agree with you on a black mantle being excessive but it is not my role to question.

Wenge is hard as concrete but crosscut surprisingly well, ran through the jointer and planer cleanly with no trouble. it may have shortened the life of the cutting tools. The splinters and sawdust are irritants. Strange looking to see black sawdust.

I put a dab of linseed on and also tried a dab of varnish to see what would happen. both of these obliterated the attractive milk chocolate colored grain veins and turned it uniformly jet black.

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#5

Re: Wenge... ideas?-

Bill White

>I used it once as a presentation base for a bottle of fine wine (reclining of course). Beautiful wood, and a joy to work with the exception of the splinters.

Finished with dewaxed shellac.

Bill

Re: Wenge... ideas?------WebKitFormBoundary8B+wQd2rhLP

#6

legs

Tom Sontag - St. Louis

>Seems to me that a 24" 2x12 could be made into at least four table legs with some material left over. Wenge compliments many other woods.