Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Hammer Veneering curling problem

Posts

Hammer Veneering curling problem

#1

Hammer Veneering curling problem

Machinist60

>I am a novice at hammer veneering. I am attempting to apply veneer to one side of 1/4" thick wood for tops of Shaker boxes, the largest being 5-1/2" x 8-1/4". I know my substrate should be quarter sawn but I did not have any. When the veneer dries the piece curls with the veneer to the concave side. I gather hide glue shrinks when it dries. Will it be enough to size the other side to prevent curling or is there a better way?

Thanks, John.

Re: Hammer Veneering curling problem

#2

Re: Hammer Veneering curling problem

tek,brunswick

>You need to veneer both sides. That applies to other methods of veneering also. That way both sides expand and contract together.

Re: Hammer Veneering curling problem

#3

Re: Hammer Veneering curling problem

Machinist60

>Thanks, tek,brunswick. The sizing was not enough. I have veneered the other side and all is well.

Merry Christmas, John.