Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Wood identification

Posts

Wood identification

#1

Wood identification

Matt Campbell

>I got this piece from a hardwood supplier. He had it in a box of cut-offs. It was a stringer for something they had shipped in. I used to see this stuff in pallets and as stringers when I used to work for that orange big box joint. I never knew what it was but in my 'Real Wood Bible' it closely matches the picture of Gaboon (Aucoumea klaineana) which Gibbs describes as a central African hardwood substitute for mahogany (Swietenia macrophylla). What do you guys think?

Photobucket

I'm thinking of cutting up and using it for handle risers for some bows I'm making. It should make a nice contrast to the Red Oak I'm using. Originally I was going to try carving it or making some scroll sawn boxes from it but I think the grain is far too porous looking for that kind of project.

Re: Wood identification

#2

Dale Lenz

Re: Wood identification

Dale Lenz

>My first guess is Philippine mahogany, launa(sp). Take a razor-blade cut on the end grain and with a 10x magnifying lens look for small white specks.

Re: Wood identification

#3

Re: Wood identification

Dan Mitchell

>I had several very similar such pieces I salvaged from the crate my PM jointer came in from Taiwan. It's somewhat open-grained, and very dense/heavy. I was assuming it some kind of mahogany, have to try the white-speck test, thanks for the tip. Working around the many nail-holes, I used some of it as inlaid mitered-corner reinforcements on a poplar box I made recently, where it contrasted nicely with the white wood, and I glued some up with birch for another box I plan to make on the bandsaw.

Makes one kinda cringe, thinking about how much nice wood has been wasted on things like pallets...

Re: Wood identification

#4

Bill Blasic

Re: Wood identification

Bill Blasic

>Looks like African Mahogany to me, Khaya spp. I have lots of it in my shop and most of it looks exactly like that.

Re: Wood identification

#5

Re: Wood identification

Don Orr

>I agree with Bill. I'm no expert, but it looks like what is commonly sold as "African Mahogany" which is not a true Mahogany.

Re: Wood identification

#6

I'm with Dale

Lee Schierer - McKean, PA

>It looks like Mahogany to me as well. Lots of third world countries use species we consider exotic for shipping crates, mostly because they have lots of it and it is cheap for them. In the Navy I used to see lots of crates of equipment that were shipped from the Philippines that were made of Philippine mahoghany.

Lee

Re: Wood identification

#7

Dale Lenz

Re: Philippine mahogany, launa(sp). ..

Dale Lenz

>that I have messed with is fairly light weight. They use it alot or at least use to on interior door skins. Dale

Re: Wood identification

#8

Re: Wood identification

Matt Campbell

>Yeah, it's not a very heavy board even though it's probably 30"x3"x3". For the size and thickness you'd think it should weigh a lot but it's not as dense as it looks. Also, when planed the new wood that shows is a lighter color than the outer more weathered wood which would be in character with what I just read on a site about how Phillipine mahogany will darken with exposure to the sun. I'll have to do the end grain check for the white specks. I'll report back on my findings.

Re: Wood identification

#9

Re: Wood identification

Matt Campbell

>I checked it and it doesn't have the white speckles on the end grain so I don't think it's Phillipine mahogany. I think it's either the first species I mentioned (Gaboon) or American Mahogany.