Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Finish for OLD knotty pine...

Posts

Finish for OLD knotty pine...

#1

Finish for OLD knotty pine...

Scott in Douglassville, PA

>Hi, all -

I'm closing in on the clock, and am pondering a finish. I slathered some scrap with water-soluble cherry-colored dye stain, and it has a nice look to it. I'll be topcoating the test piece with tung oil finish later.

Is this a good finish for old old knotty pine? The wood had been used as rough paneling for almost 30 years. I've since planed it smooth - if pitch still a concern? Is there another simple way to finish pine evenly, and still add some color to it?

Thanks,

Scott

Re: Finish for OLD knotty pine...

#2

Re: Finish for OLD knotty pine...

George@Colonel's Workshop-Havertown PA

>Good Evening Scott,

Its as broad as it is long! Old knotty pine is great under anything in my opinion. The last pine piece I did was an old steamer trunk belonging to a clients mother. I stripped it of black paint and sticky shelf paper applied by the old lady who was senile. After more prep it was down to the base wood. I decided on amber shellac which I dulled down a bit with steel wool and applied paste wax. The pine had a soft glow to begin with, and I sought to heighten that aspect. For the clock, I'd have to know the setting--no pun intended, of course. :<)

George

Re: Finish for OLD knotty pine...

#3

Re: Finish for OLD knotty pine...

Glenn Madsen near San Francisco

>+1 on the shellac. I've been using standard clear Zinsser shellac on cherry this past couple of weeks, and love how it comes out. Easy and cheap, too. And would certainly fit a Shaker clock.

Re: Finish for OLD knotty pine...

#4

Re: Finish for OLD knotty pine...

jerry mayfield

>The finish I have used for many years to speed up the aging of "punkin pine" is freshly made orange shellac.

Regards

Jerry

Re: Finish for OLD knotty pine...

#5

How do you take your tea?

Scott in Douglassville, PA

>I read somewhere about using strong tea as a non-blotching stain on pine. Gave it a try.

Ok, here ya go:

Pine, Tea+Ammonia, Tea, Raw, no topcoat


Pine, Tea+Ammonia, Tea, Raw, One coat 2# shellac


The tea is some cheap stuff I bought. Twelve bags in a cup of boiling water. It gives a nice mellow honey-pine color, but the effect is somewhat minimized with the Bullseye shellac - the shellac coat is not far off from the tea alone when topcoated. The brown of the ammonia-washed tea is a little green, but the shellac fades that, too.

I need to pass this by the wife, but I think one of these two will work on the clock...

Re: Finish for OLD knotty pine...

#6

Re: Finish for OLD knotty pine...

Michael Wilkins

>The last project I had using old knotty pine was finished with 2-3 coats of Buttonlac shellac. It seemed to bring out the deep amber coloring that is indicative of old pine, and does a great job of sealing it as well. I have never tried to color it with stains/dyes, although these work if you are looking to alter the natural color.