Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>8 Dec 2008

Good Morning and Happy Holiday Season to all of you.

Been working on the kitchen table when I'm not at the day job. I will say that I'm glad to have a day job as many that I know no longer have a day job or any job for that matter. The table is moving along nicely and I'm finding out that as I get older I'm more and more sensitive to Black Walnut wood dust. So now I'm having to rethink my process and air filtration in my shop.

The LOML and I celebrated our 25th wedding anniversary this past weekend and we had a nice dinner out and I took to see "The Boys of the Lough" last night at the University of Central Arkansas. The presented music and singing of "A Celtic Christmas". Very nice music and wonderful Celtic music of the Irish tradition. A lot of it can really make you want to get up and move your feet.!!!

It's off to the dentist here in a few minutes and then it's back here and work on the kitchen table more today. I'm really hoping to have all assembly work done today.

So what did YOU do this weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Mike Fitterling

>More addition work. This time I was able to get the interior door jambs milled, sprayed, and up (cypress). Also got my batch of router bits from Holbren that will do all the moldings and did a sample of each. Jointed, planed, resawed, and planed again a few cherry boards and cut into strips for the office wainscoting top rail. Sprayed them with lacquer and they will go up today.

Between spraying sessions, I was able to a "Mr. Sawdust" table made and installed on my new old Dewalt GA and start the alignment.

Cheers,

Mike

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Karen

>My weekend was busy also.

Sanded and stained an oak baby rocker, a parawood kitchen island, a coffee and end table, a bedside drum table and a nightstand.

Also painted a lift top table and a pine TV stand.

In between all that, I finished a celtic knot turning, cut and glued up 3 more blanks for future turning, hand-planed another �" off the seat of a drying sassafras bench, planed half a dozen 2x6 cypress boards in prep for running molding this week and cleaned the shop afterward.

MBH cut and sanded all the lettering for a sign, got the staining on that finished up, planed 3 big slabs of cedar, milled 144 feet of molding and mowed the back yard.

And like you Dennis, we're also experiencing a higher sensitivity to walnut dust. Cedar, too.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Tom Dunlap

>In November I moved to a new place. This one has a single car garage that's 'rocked and has wainscoating. Pretty nice! Little by little I'm getting the shop setup.

During the move the drivebelt for the tablesaw made it's bit for freedom. It should have been taped to the TS but in the frenzy it wasn't. What a good excuse to get a Link Belt!

Yesterday I was working on a project and I needed to tap a hole. The tray that holds the taps has nice pockets for all of the taps. After dropping the tray several times the taps look like a log jam. As I started to sort them I ran the tangs on the wire wheel on my grinder so that the sizes are visible. After 20 plus years of use they'd rusted a bit and gotten grimy. Before the tray went back in the drawer I added better handles so that I don't drop it again. Seeing all of the taps shiny and in their own beds looks SOOO nice!

Tom

Re: WC Weekend Accomplishments....

#5

Congratulations, Dennis/SCMS Inoperative

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

Twenty five years is one big Silver Milestone. Some shop time this weekend for me. Charlie was here on Friday to help trim out the cap/cap moldings to the bed's foot and head board. I glued on the caps and sweetened the mortices for the bed posts. Then decided where to cut them off. Also decided to develop my own finial design and not depend on the commercial/catalog offerings.

Got as call from #3 son yesterday, needing help putting my grandson's new train board together. He is using the same HO guage rolling stock which I bought a couple decades ago. Its all been resting in a cardboard box for nearly six years.

My SCMS is broken and needs some replacement parts. I need my #3 son to look at it before I call in an order. He sees things I can't. In the meantime, I use a table saw sled for cross cuts. Small dinner party last night, but fun. Have a grerat week Dennis, and another happy 25 years.

George

Re: WC Weekend Accomplishments....

#6

Ellis Walentine

Shop time! (Well some at least...)

Ellis Walentine

>Hi Dennis,

Busy as usual here at HQ. I got a lesson in non-linear video editing on Saturday morning from a friend's son who is half my age. I can't believe how adept these youngsters are on the computer. Then my pals Art and Tom stopped by to shoot the breeze and play with a few planes that I was tuning up. We had a nice visit.

I'm actually making some progress in my shop. I've already missed my chance to get one major present finished by Christmas, but I knocked out a couple lathe projects yesterday, cleaned off my benches a bit, swept the floor, kept the woodstove burning. I think the stove is a great incentive, because once I get it going and get the shop all warmed up, I feel like I need to stay there and work. Otherwise the firewood is wasted.

We also let my SIL and his two uncles hunt on our property on Saturday afternoon and they got two deer in short order. Now the freezer is full of filets and roasts. I'm not a hunter myself but I do enjoy venison, and we have way too many deer, so not much sympathy there.

Today is my wife's day off, so I hope to get some more shop time in. Should be fun.

Ellis

Re: WC Weekend Accomplishments....

#7

minature guitar almost built

john lucas

>I'm building a Doll for my mother for Christmas. It is a doll of me playing the guitar to go along with here antique carolers that she puts out each year. I got a little carried away with the guitar. It's about 4" long and has a bookmatched curly maple veneer body. The neck is Mahagony with dyed black veneer for the fretboard. I'm still working on how to do the frets. I made the head of the doll from clay and will paint it tonight or tomorrow. The body is wire and I still have to make the clothes. Hopefully it will all come together before Christmas.

Re: WC Weekend Accomplishments....

#8

Halton Youth Orchestra Christmas Concert *LINK*

Jim Shaver - Oakville, Ont

>Hi,

I spent most of my weekend getting ready for the Sunday Christmas concert . The orchestra is comprised of two groups, a chamber orchestra (elementary aged children) and a symphony orchestra (high school aged teenagers).

Dana plays in the chamber orchestra (35 musicians), I have attached a link to a song they played, Van Morrisons Moon Dance, (ps: watch the Chellos at the end).

Photobucket

The symphony orchestra is 57 musicians.

Photobucket

Photobucket

They competed in a youth symphony contest in Vienna in July 08, they finished 4th out of 35 orchestra�s from around the world.

There was a raffle fund raiser and I donated some wood lanterns I made.

Photobucket

Take care,

Jim


Moon Dance

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Allan D

>I finished the first piece of my living room suite: a mission oak coffee table. I'm glad I learned and grew more skillful in making flat tabletops with my bedroom pieces. The living room is much more brightly lit and many more people will see the coffee table. It has a 36"x48" top and I worried about getting it completely flat. I learned to become more precise in cutting biscuit joints, stopped using my old belt sander, and broke out my hand scraper. Finally, reading and learning on WC, I bought a Ridgid ROS. I love this thing! Hooked up to my shop vac I get almost no dust and it is the bee's knees for sanding tabletops.

I did use poly varnish instead of lacquer for the top but rubbed it down starting with 400 grit W/D paper going to 2000 grit and finally very fine steel wool and paste wax. I'm very happy the way it looks.

Re: WC Weekend Accomplishments....

#10

Re: Shop time! (Well some at least...)

Ray Carson - Lawrenceville, NJ

>Ellis,

Glad to hear you got some shop time in. You do so much for Wood Central, I honestly don't know how you have the time. :-)

So......what's the outcome of the puppy name?

Ray

Re: WC Weekend Accomplishments....

#11

Re: WC Weekend Accomplishments....

Ray Carson - Lawrenceville, NJ

>Hey gang,

Late posting today for the Dennis's W.A.

It was an okay weekend, no shop time. I kind of had the wind taken outa my sails on Saturday.

As some of you may know, I'm pursuing a building a New Jersey Inspector's License in addition to working full time, raising kids, devoting time to the wife, etc. The load finally took it's toll.

Anyway....I finished and passed ALL my classes. (thanks) Last one was on Dec. 3rd. and the final college exam was 3 1/2 hours long.....and it was BRUTAL !! I also had a State exam scheduled for this past Saturday in Toms River at 9:30am. (what was I thinking)

There are 3 levels of a NJ bldg. inspector and 5 exams required for that type of inspector. I've already passed three state exams. There's two for Residential, (passed) Two for Industrial,(passed one) and one for High-Rise/High Hazards.....I took this one on Saturday.

I skipped the second of industrial because it's the Mechanical portion and I new I couldn't prepare myself in time for that one.

So........onto the exam for High-Rise/High Hazards. I thought I had prepared enough. As I was taking the exam, it just didn't feel right. I knew I was bombing. Fifty questions, in two hours, 2 minutes a question and the first three took me 10 minutes. I failed.

I got real mad at first, then depressed, then I just "zoned" out. The drive home from Toms River to Lawrenceville seemed like it took days. I laid down on the couch for a while and realized the $135.00 for the exam was gone and so was the wind of my sail. I then realized that thers' no sense sulking. I needed to get off my keester.

After a hug from the LOML I told her I needed some time alone and was going outside to hang up Christmas lights. She obliged my needs. The lights never looked better!

I will study some more, and take the test again someday soon.

Life goes on,

Ray

p.s. I hope everyone had a good weekend. :-)

Re: WC Weekend Accomplishments....

#12

Celebrated Our 56th Anniversary....

Ken Oakley-Sunny St. Cloud, Fla.

>LOML spent weekend doing all kinds of things with her church, leaving me in peace and quiet. After 56 years, that is the best kind of celebration.

Worked in shop, watched History Channel,some football, Girls Next Door show, napped, ate whenever and whatever I wanted. Ah, Life Is Good

Re: WC Weekend Accomplishments....

#13

Congrats to Dennis & Ken.

Ray Carson - Lawrenceville, NJ

>Hey Ken, you go boy! (getting to do anything you wanted on your 56th)

LOL

Re: WC Weekend Accomplishments....

#14

You're the one that cut your finger.

Eddie Pacheco; San Jose, Ca.

>But, you're keeping me in stitches!

Re: WC Weekend Accomplishments....

#15

Ellis Walentine

Pup is Jasper

Ellis Walentine

>I couldn't get my wife to agree to Ernie, so Jasper it is.

Thanks for the kind words, Ray.

Ellis

Re: WC Weekend Accomplishments....

#16

Ellis Walentine

That video was wonderful!

Ellis Walentine

>I'll bet that performance was a real thrill for you, Jim. Was that Dana playing violin in the back on the right?

The cello trick was great, too. Good post. I didn't know Photobucket allowed that sort of thing.

Thanks for posting.

Ellis

Re: WC Weekend Accomplishments....

#17

Re: Pup is Jasper - Good name!

Ray Carson - Lawrenceville, NJ

>

Re: WC Weekend Accomplishments....

#18

Re: That video was wonderful! *LINK*

Jim Shaver - Oakville, Ont

>Thanks Ellis,

Dana is first-second violin, sort of 10 o'clock poition from the conductor (she's getting closer to that first seat).

The Older kids did a great job too, the link takes you to a peice they played to win 4th place inVienna this summer, thanks.

take care,

Jim


Brahms, Hungarian Dance

Re: WC Weekend Accomplishments....

#19

I echo Ellis--wonderful video! But wait--

Joanne in Pt. Pleasant, PA

>where's the picture of you in a tux?! Weren't you emcee for the concert? C'mon, brother, cough it up! Or were you oozing too many tears of pride and happiness at Dana's success for anyone to take a picture? Tell Dana I said "You go, Girl!"

and Ellis is right again--ya gotta love those cellos.

Re: WC Weekend Accomplishments....

#20

Re: I echo Ellis--wonderful video! But wait--

Jim Shaver - Oakville, Ont

>Nope, No Pictures...never happened, LOL

Take care,

Jim

Re: WC Weekend Accomplishments....

#21

Thanks Jim, That was great!!

Dave Peebles Lyons, Ohio!

>

Re: WC Weekend Accomplishments....

#22

It Surely Was!

George@Colonel's Workshop-Havertown PA

>

Re: WC Weekend Accomplishments....

#23

Keep Your Oar in the Water, Ray..

George@Colonel's Workshop-Havertown PA

>

Re: WC Weekend Accomplishments....

#24

Re: minature guitar almost built

doug f, san clemente, ca

>We're definitely looking forward to the pictorial on this one!!

Doug