Da-ding
Mark Goodall - ATL - tooljunkie
>Guess we should take this in steps.
First, do any LED's light up when the power switch is turned on? Do you hear a faint whirring inside the external drive? If you hold it does it appear to be spinning with the gyroscope effect you feel with it in your hand?
Assuming that it is working, does your computer reconize the device? Did you hear the typical Windows "Da-Dign" sound when you plugged it into the USB port? Did a window pop up saying it found a new device? Did it ask you what you wanted to do with the device?
If you click on "My Computer" and look at the drives availabile, do you see a new drive? Likely a F: drive or a G: drive? If so, when you click it do you see folders and files?
On most external drives these days, all the setup program files that they used to include on a CD and on the hard drive itself. You used to insert the CD and it would Auto-Run an setup/installation program. Similarly, when they don't send a seperate CD, the AutoRun setup/installtion programs included on the harddrive itself will usually start automatically and load the software.
Some external hard drives, don't come with anysoftware, eitehr on CD, or on the hard drive itself. But if you find files/folders on the hard drive, you probably will find a SETUP program, and clicking it will install some sort of backup utility software. Each hard drive manufacture uses different software. Sometimes it's a scaled down rebranded version fo commerically available software.
As other's have mentioned, there are two approaches to backups.
1 - Simply copy your data files and folders from your C: drive to your G: drive periodically.
2 - Use software that will either manually or automatically backup either selected datafiles, or the whole hard drive.
I use both and there are pro's and con's to either method.
Of course, this all assumes that the external hard drive is working and yuo can see the hard drive and it's contents when you go to "My Computer".
Happy Woodworking!