Today's finishing adventure
Clint Searl, at the base of Haycock Mtn
>Long story short�.I wanted to use Waterlox as a barrier seal over water soluble dye stain so I could have the option of topcoating with more Waterlox or either a water borne clear or clear solvent based resin. Half a quart of Waterlox, left over from an earlier project, had been in the freezer for a couple years to stop it curing in the can. After warming, it came out of the can like cold honey, unthinable and unusable. Since I rarely use a drying oil finish, it�s not worth $24.50 +S&H for a quart of anything that gets half used and jells in the can before the next project.
Instead, I reduced some NC lacquer to about 12% solids, and brushed one coat on. After an hour it was hard enough to rub out with maroon scotchbrite. No brush marks and smooth as a baby�s tushie. It�s just a effective as shellac and anything can go over it.
Clint



