Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Dismantle Furniture

Posts

Dismantle Furniture

#1

Dismantle Furniture

Nick Taylor

>I was hoping somebody could possibly hlp me with a problem I have encountered. I have just bought some second hand furniture for my impending new baby's room, who is due on the $th od Dec. After driving four hours across the country to pick this quality five piece set up, I was horrified when I realised the wardrobe and the chest of drawers will not fit up the stairs.

The stairs to the bedroom has a tight ninety degree angle and has caused many problems. An initial inspection looked as if the removal of some screws would mean the sides of both items would detatch however it looks as if they are glued!

Has anyone any tips or advise on how to solve this problem.

Re: Dismantle Furniture

#2

Re: Dismantle Furniture

waltc

>Hi,

With a baby on the way, you don't have time for a lot of reconstructive furniture projects.

Strongly suggest you look at Ikea (store or catalog). It's cheaper contemporary design, but IT COMES FLAT IN A BOX, so it will go up the stairs and around the bend into the baby's room. It IS well made, all the parts go together accurately.

Yes, it is disposable furniture, but your child to be won't be a baby forever either, and you will graduate to either better furniture, or a house with a more spacious stairway.

We own a fair abount of Ikea, and have never been disappointed.

Walt C

Re: Dismantle Furniture

#3

Re: Dismantle Furniture

Jim McFall

>Will it fit through a window on the second floor ??

Re: Dismantle Furniture

#4

Try It

Don Orr

>Take the screws out and see what happens. What do you have to lose ? If it comes apart, great. If not, then you will have to rethink. Maybe a little gentle persuasion and then you can reassemble and reglue with an epoxy since wood glue does not stick to dried wood glue.

Best of luck with the new baby !

Re: Dismantle Furniture

#5

Re: Dismantle Furniture

John E in SC

>Even carried upright it won't make the turn? Unless those are some huge pieces of furniture, I have a hard time imagining a stairwell so tight you couldn't even get a chest of drawers up them. If there's absolutely no way, I think you would cause too much damage taking them apart if they're glued - I'd probably try to sell what you have and use the money to buy something that fits. If you tear them up, they'll be pretty much worthless to you and anyone else.

My 2 cents,

John

Re: Dismantle Furniture

#6

Re: Dismantle Furniture

John K Jordan

>Can a long piece be stood on it's end? We've moved pianos through tight spots that way.

Can you remove stair railings for more clearance?

I once built a full-sized cardboard model and another time cut a profile from paper to figure out how to get a grand piano through a tight spot.

If the furniture is old and put together with hide glue, the glue might be softened with a hot iron for disassembly. When rebuilding a player piano years ago I disassembled many components with heat. (The advice when rebuilding players is to NEVER use modern glues or future rebuilders will be "stuck".)

If not hide glue, you still might be able to split things apart inside the cabinet if they are not mortised. Splitting leaves splintery surfaces which can be registered perfectly when regluing. If the piece suffers cosmetically, paint it pink! (or blue) Also, the little Fein Multimasters have a very thin blade that can cut flush in tight spaces.

JKJ

Re: Dismantle Furniture

#7

JL

Vinegar or dilute acetic acid will sometimes work.

JL

>On yellow glue that is. I've managed to loosen yellow glue by applying several applications of dilute acetic acid (~10%). If you have to pry, DON'T use metal to pry or it will leave a stain that is a PITA to get out (DAMHIKT).

I have used plastic scrapers to separate glued pieces after the acetic acid has sat for a while. Afterward, use dilute baking soda to complete the neutralization, scrape and sand to get the rest of the glue off of the piece and then refasten.