Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>1 Dec 2008

Good Morning,

Well, I don't have to tell you that you have a little over 3 weeks to be ready for Christmas morning. Lot's to do between now and then.!!!

Well, we got back last night from our family visits to Alabama for the Thanksgiving holiday. Thanksgiving is the only holiday we always set aside for out of state family visit. After driving for a little over 1,100 miles round trip, it was well worth the trip...and thankfully the gas prices were well under $2 per gallon which made the family trip "much" more affordable. For the gas prices being down under $1.70 per gallon? We were extremely thankful.

We visited my folks in Huntsville, AL and then we visited with the LOML's folks in Prattville, AL (real quick trip there and a short stay due to aging parents with a short tolerance level for many visitors in their home), and last but not least, we visited the SIL and her husband and family in Chelsea, AL. We stayed there the longest (3 day) as we always have a good time visiting with them and our growing kids get along very well together. Then it was the drive home yesterday and what a mess the traffic was on I-40 between Memphis, TN and Little Rock, AR.!!!! WOW!!!!! What normally would take us 2 hours to go from Memphis to Little Rock? Took almost 4 hours due to traffic and using I-40 as a parking lot for about 30-45 minutes along the way. I guess next year, we'll just travel home the Monday AFTER Thanksgiving to give the roads time to clear.

No woodworking this weekend...just spending a LOT of time behind the wheel of the mini-van.

So what did YOU do this festive weekend???

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Mike Fitterling

>Before the holiday, I started milling the old growth cypress I am using for trim in the addition. I made up enough stuff for one door to see how the design and color of the wood would work. I used an old molding plane to create a bead on each edge of the door stiles, which I think will work well. The cypress with a clear lacquer coat looks good against the bamboo flooring. Today I will continue getting all the jambs cut if I am not sent out again to mov eouor books room again, whcih we started last week.

Thanksgiving morning was spent setting up hunting camp, then back for food at both families'. Friday morning found me in the woods before light sititng in a tree. No luck until Saturday, when my brother bagged a wild hog. Next morning a eight point buck was seen but not taken. We must have walked ten miles that weekend, partly through swamp, most of it with 40 pounds of tree stand, gun, and gear on our backs.

I am pooped, but looking forward to getting back to the trim work and finishing up this addition.

Cheers,

Mike

Re: WC Weekend Accomplishments....

#3

Broke My ROS Sander+Bought its Twin

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

Besides the Thabnksgiving Day activities, and hosting my #2 daughter's family and #4 son, I felt it an excellent escape to hook up my 5" Ridgid ROS with the Shop Vac and sand the panels to our queen size bed. About 20 minutes into the exercise, the sander stopped dead and couldn't be revived. Ridgid fixed it before. However, its the only machine which I can hook up to the vac, and the repair turn around time is something I can not afford. So I bought another, identical item. It will get a good initiation this coming week. I also did some layout work for stile mortices on the bed posts. Charlie is due this morning and we will create the 1/2" X 1" tenons on the panels. Maybe we will have time to plunge the mortices. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Chuck in ND

>I'm geting to the final stages of bringing a 9" Delta 34-608 Contractor's saw with a Unifence back to life. I bought it a month or two ago after stumbling upon it at a rumage sale siting in a driveway, I was on my way to the hardware store, buying another saw was far from my mind at the time. The saw looks like it doesn't have many miles on it, but the previous owner didn't know how to maintain it, so I got a pretty good deal on it. For those that don't know about these saws, they are about 25 percent smaller in size than the Delta 10" Contractor's saw, makeing them a great candidate for a small shop.

Re: WC Weekend Accomplishments....

#5

One present down

Bill Earl

>Finished a small coffee table for my wife.

Wood: Honduras Mahogany and Petrified Teak

Finish: Shellac & Wax


img

Re: WC Weekend Accomplishments....

#6

Nice one Bill!

Mike Farinella

>

Re: WC Weekend Accomplishments....

#8

Ellis Walentine

Egad! Petrified teak.

Ellis Walentine

>If you thought fresh teak was hard on tools, imagine what that petrified stuff must be like. Nice job.

Ellis

Re: WC Weekend Accomplishments....

#9

Very cool!

Clint Searl, at the base of Haycock Mtn

>