Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Cross grain dovetails?

Posts

Cross grain dovetails?

#1

Cross grain dovetails?

Denny

>Folks,

I'm considering using through dovetails to join the legs of a tansu-style dresser to the top front rails. The plan is to use 8/4 cherry, with the top rails extending out past the sides several inches (effectively giving you carrying handles for the dresser). The legs will be dovetailed into the top rails with 2 large pins, but of course the grain of the two pieces is perpendicular. I did a test joint and it seems bullet-proof, but I'm concerned because I've never seen this done except for smaller joints inside of casework, holding webframes together. Am I asking for trouble?

Thanks,

Denny

Re: Cross grain dovetails?

#2

Re: Cross grain dovetails?

Alan in Little Washington (NC)

>It is done all the time, especially in timber framing where they sometimes use dovetail half lap/bridle joints. The joint you don't want to use is one where the tails are made in the rail (cross grain tails) and the sockets in the leg- the tails can snap off in a flash, even when you are cutting them.

Re: Cross grain dovetails?

#3

Thanks Alan!

Denny

>