Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

TS hold downs

Posts

TS hold downs

#1

TS hold downs

Hamish

>Does any of you gentlemen own or have any experience using the Leichtung Anti-kickback hold downs as seen on the following link. If so, do you know where I could buy them?

Many thanks, Hamish.

http://books.google.com/books?id=l_8xoBC2LSoC&pg=PA124&lpg=PA124&dq=ripstrate+wheels&source=bl&ots=H0MWnH477y&sig=DYqMk-ukuB5NjlJqGuo_3XAcmNI&hl=es&sa=X&oi=book_result&resnum=2&ct=result#PPA124,M1

Re: TS hold downs

#2

Re: TS hold downs *LINK*

Dave Paine

>I am not sure where to buy Leichtung items, but there are a few competitors on the market. This one is sold at a number of places.

Called Board Buddies. The yellow version is for table saws and only rotates clockwise, so much be mounted on fence which is right side of the blade.

Other versions rotate counter-clockwise only, or rotate both directions.

I have the yellow board buddies. Have used once. I tend to use alternate holddowns like GripTite or Magswitch.


http://www.amazon.com/Woodstock-International-G2370-Board-Buddies%C2%AE/dp/B0000TFIQW

Re: TS hold downs

#3

Re: TS hold downs

Joseph Mulherin, Sr

>Why not cut some finger boards and mount them on the fence.

Re: TS hold downs

#4

Re: TS hold downs

Hal

>I've had "yellow wheels" on my saw for years. Wouldn't be without them. They not only act as holddowns, but also prevent kickback and hold your work against the fence. Got them fom Grizzly where yoy can also get the mounting track. Hal

Re: TS hold downs

#5

Re: TS hold downs

Jim Dillon

>Hamish,

Yes, I have them and used them quite a lot during the first half of my ongoing 13 year experience with woodworking. Haven't used them recently, but I keep them on hand beneath my TS as they work quite well. IIRC, they and the yellow Board-Buddies were advertised quite a bit during the mid 90's, but I have seen less advertising, if any, recently. Very very vaguely, I seem to recall I got them dirctly from Leightung, but don't hold me to that. I will try and remember to check tomorrow for a receipt, but no guarantees.

Jim

Re: TS hold downs

#6

Re: TS hold downs

Hamish

>Hi Jim,

I've found out that Woodworker's Supply, Inc. stock them, although there is a hold up in their delivery until January. I thought about getting the Leichtung Anti-kickback hold downs as opposed to the board buddies, because they could be clamped to the fence and don't depend on a track.

Hamish

Re: TS hold downs

#7

Re: TS hold downs

Jim Dillon

>Hamish,

Glad you found a source for them as I couldn't find my receipt which doesn't surprise me as I had a big cleanup of my files a few years ago. Here is a picture of mine hooked up to my sacrificial fence. This arrangement works well. As an aside, I have a similar fence, only 12 inches tall, for taller stuff but the hold-downs can't be used on that one. Apparently Leichtung Workshops still exists, but on my SLOW dial-up connection, browsing of their site is painful. Whether-or-not they even carry the hold-down is unknown.

Jim


img