Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Crown for a tall clock?

Posts

Crown for a tall clock?

#1

Crown for a tall clock?

Scott in Douglassville, PA

>Hi, all -

Making a little slow headway on the Dominy clock project. Tonight I got the inner dial frame half-lapped, bead mitered, glued up, and the bonnet pushed along toward goodness:


There's quite a bit of work left to do, but I can place the bonnet roughly in place, and it's starting to look like something:


Now, the original Dominy clock (and Nahm's version of it) has an ornate crest atop it (Chris Schwartz's photo, BTW):


I'm questioning now whether I want to use that design, or use some sort of crown molding instead. There's a pretty elaborate molding just beneath the bonnet; I'm thinking a scaled-up version of that at the top would be appropriate, and more in keeping with the inlaws' decor. Or, just a larger arched cove, sans crest. I dunno.

Opinions? What would be appropriate for such a simple clock?

Thanks,

Scott

Re: Crown for a tall clock?

#2

Re: Crown for a tall clock?

Bill White

>I'll vote for simple. While I appreciate the "fluffy" stuff as an historic fact, I'm not a big fan of ornate. For example: I shudder at the Louis 14th style with all the gilt, tec.

Bill

Re: Crown for a tall clock?

#3

Re: Crown for a tall clock?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Scott,

I would lean towards the cove without crest. However, why not ask them? And, te crest need not be all that elaborate. They may even opt for a simnpler crest, and be in keeping with the original design while dressing the bonnet up a littler bit.

George

Re: Crown for a tall clock?

#4

Re: Crown for a tall clock?

paul in AZ

>Here is one I made many years ago. Its a grandmother size, a bit over 6 feet tall, in walnut.

The top is the most memorable part of the project because of a dumb error.

Front and sides of the crown were made as one piece and then cut off mitered. In a lapse of thinking I cut one of the miters backwards. glued back together and recut it went together nicely.

First attempt at posting a pix so excuse any screw ups.


img