>My wife has made her request for Christmas, and it is for a quilt rack. Do any of you have pictures of quilt racks you have made? I have seen some after doing some searches, but I would appreciate any additional thoughts you might have so that Santa can get out to his workshop.
>Warren, here's one I turned a while back out of walnut and ash. It was turned at half the final length, sliced in half longways and connected end-to-end, then a quilt-hanging mechanism added to the back.
>... you'll have to live with a description of a quilt rack I made for an associate's wife, who is a quilter and collector. It was a tapered, ladderlike affair, about 90" tall as I recall, made of black walnut, with rungs about 16" apart, tapering from about 24" wide at the bottom rung about 30" off the floor to 16" at the top rung about 84" off the floor. The feet of the ladder were cut at about a 75� angle so that it sits flat on the floor while leaning into a wall or corner of a room. I can't even remember the joinery, but it may have been some kind of dovetail between the rungs and the uprights. It will display about 5 quilts as I recall.
If I can find the photos, I'll post them. It fills a corner of a room with quilted splendor. Maybe you could make it out of quilted maple. :-)
>You might want to check out Charles Neil's site at: www.antiquesbuiltdaily.com. He has a free project video on how to make a quilt rack and the plans are also on his site.
>More than a decade ago I made this from an article by Kelly Mehler. Not sure but believe it was in Fine Woodworking. If you don't have an index, you can e-mail him to see if he can provide a copy or has plan available. All of the stretchers are through tenons.
>Ellis check out "Antiques Built Daily" Charles Neil's site he has a nice quilt rack, I have built two and they are easy to build and really look nice.