Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

shopsmith

Posts

shopsmith

#1

shopsmith

Jerry Gibbs

>I have a shop full of single purpose tools. I spend 3 months in FL with extremely limited space. I first thought this would be a good chance to develop my hand tool skills. Now I am considering a used shopsmith or similiar, especially for the grunt work. is it worth the expense? I realize the planning and changeover required, but hopefully I can relax and take my time. Jerry Gibbs

Re: shopsmith

#2

Re: shopsmith

Glenn Madsen near San Francisco

>I have a Shopsmith. If you have used, or own, decent single purpose tools, you may be disappointed with the Shopsmith. Mine gets used as a disk sander now. I bought all new standalone tools over the years.

There are dozens of ways that this machine can be misconfigured. I get none of that with my other, standalone tools.

On the other hand, if you buy one used and cheaply, you can give away, and only have risked a few dollars...

Re: shopsmith

#3

Louie Lovas

Re: shopsmith

Louie Lovas

>I've owned a Shopsmith for about 15 years, nowadays I only use it for light-duty work - belt sander, jointer and lathe (spindles). The good thing about SS is that they've been around since the Mayflower sailed. My belt sander attachment was made in the 50's - fits like a glove on an 80's Shopsmith.

If you decide to buy, go strictly used. There is a really large re-sale market, just goto eBay and search "shopsmith" and see how many hits you get.

The tablesaw and bandsaw are really only good if you're doing small things (personal opinion of course). I sold my bandsaw attachment on ebay years ago, haven't used the tablesaw in ages.

If you're pressed for space but not pressed for time, and make small items (and not queen sized beds and dressers) then find a used model 510/520.

Re: shopsmith

#4

Re: shopsmith

Dennis Yoder

>Where in FL Jerry? I might know of a reasonable shopsmith that belongs to a widow. Dennis Y

Re: shopsmith

#5

Re: shopsmith

Jerry Gibbs

>near Bradenton/Sarasota. Jerry Gibbs

Re: shopsmith

#6

My dad had a Shopsmith

Bill Houghton, sunny in Sebastopol, CA

>But, during his peak production years, he also had two teenage boys, spaced perfectly apart (7 years) to extend the time that he'd have someone to catch the board as it came off the miniscule table on the table saw.

In my opinion, it's a concept tool - interesting concept, not much tool.

Re: shopsmith

#7

I should say, to be fair

Bill Houghton, sunny in Sebastopol, CA

>there are certain things at which it excels: disk sanding and horizontal boring are the two that come to mind right away.

Re: shopsmith

#8

Re: shopsmith - had one for ten years

Carol - now back in Dubuque, IA

>so, in all fairness, it has its limitations, but it does work. It does not works as well as bigger, more powerful tools that take lots more floor space.

But if your floor space is limited, you don't plan to go intro production cabinet making , and you are happy with it, go for it.

Its kinda like a lathe, the little one works for little stuff. The big ones work for bigger stuff. You didn't mention what you like to make, so the Shopsmith may work quite well for you.

And, FWIW, Dennis Yoder is a good guy. If you can connect with him, you won't go wrong.

Re: shopsmith

#9

Re: I should say, to be fair

mike@American Sycamore

>With all its limitations it still is a good tool in the hands of someone that understands its short comings and works around them. For a tight space I highly recomend the Shopsmith Mark V 500-510!

It is a good lathe, a great drill press, a fair lathe, great disc sander, and boring tool. The tablesaw is its weakest link. I have seen some great furniture built on a Shopsmith. Its the woodworker not the machine. The only people that really bad mouth the unit never owned one. Good luck!

Mike

Re: shopsmith

#10

Re: I should say, to be fair

Joseph Mulherin, Sr

>I bought my Shopsmith, 500 version, in 1978; upgraded to the 510 in 2004. Have made many pieces of furniture and other items over the years. Like the man said, it is the woodworker not the machine that makes this tool what it is and can be to the small homeowner with limited space. I also have several single units I use at times, such as a small drill press, a contractors saw I can take with me to a job, many hand tools and power tools. It is just the man/woman that makes this tool what it can be for producing a product.

Re: shopsmith

#11

Re: shopsmith - had one for ten years

Bill White

>As the saying goes, "It ain't the arrow, its the Indian."

I have the Magna bandsaw (yep--as in old) on an independent power stand. Interchange it with the l'il 4" jointer for drawer edges and little stuff. I find the pieces to be well made.

Granted the table saw feature is the weak link, but the SS sure beats 3 months without play time.

Bill

Re: shopsmith

#12

Re: Dennis Yoder

Ken Oakley-Sunny St. Cloud, Fla.

>Anybody who lives in The Green Swamp has to be a nice guy.

Re: shopsmith

#13

Re: shopsmith

Lee Schierer - McKean, PA

>Years ago I considered one since I had limited shop space and looked at it as a way to get a lot of woodworking tools for a fairly economical price. However, after watching several demonstrations it occurred to me that you would need to plan your projects out pretty well so you wouldn't be constantly switching from one mode to another. The demos I watched seemed to be pretty well scripted so they knew exactly what to do in what order to make the minimum number of setup changes and adjustments. I think on most first time projects you would spend as much time changing modes as you would working. I elected to go for conventional equipment, not the all in one tool.

Just my opinion

Lee

Re: shopsmith

#14

Re: shopsmith

Pete LaBelle

>I was born & raised on my dad's Shopsmith. After I was married, I picked up a used on and completely rebuilt it, then used it for almost a decade. As my woodworking skills improved, I started to see some of the downfalls of the Shopsmith. I ended up selling it and progressively bought stand alone machines.

If you are looking to downsize, maybe start buying more table-top machines that can easily store. Kinda depends if your woodworking involves birdhouses, or exotic furniture.

I kinda summed up the Shopsmith as this: It's kinda like a Swiss Army knife. Well built & respected, but even though you have "all the tools", they not as good as the "real tools"

Pete