Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

T@G floor spans

Posts

T@G floor spans

#1

T@G floor spans

Hamish MacAllister

>I want to put 2x6 tongue and groove flooring over a timber frame floor joist system in my Abbotsford wood-working shop, and am wondering what kind of span i can get away w/. the floor will support a 40-60psf load, and the t/g will be select tight-knot white pine. Any input would be much appreciated. Thank you.

Re: T@G floor spans

#2

Re: T@G floor spans

George Koch

>If it is going to be a single layer of floor I would suggest not going more than 2' centers between joists. George

Re: T@G floor spans

#3

Re: T@G floor spans

Dan Donaldson

>I would put at least a layer of particle board flooring under it.

Re: T@G floor spans

#4

Re: T@G floor spans

GalenV

>If someone has an Architectural Graphics Standards book they can probably give you better numbers but as I recall 2 x decking can carry like 90 pounds per square foot on 24" spans and the deflection is like 1/360 of the span. T& G decking may be just slightly different and forget if better or worse, but not too far off.

Help salvage lumber from old warehouse floor and they had like 1 1/4 to 1 1/2" planks on at least 24 or a little more.

For what it is worth.

Re: T@G floor spans

#5

Re: T@G floor spans

John K Jordan

>Hamish,

FWIW, I live it a timberframe house constructed by the Timberpeg company. The entire second floor has 2x6 white pine T&G flooring, exposed below, with 3/4" heart pine above for walking on. The supports are 6x6 beams on 4' centers. This is nothing if it's not solid. There is no noticeable deflection in the upper floor, even an unfinished storage area with the T&G alone without the heart pine.

This house was built in '88. The shot below is from when I was installing a new kitchen when we moved in a few years ago - it gives a glimpse of the ceiling construction. (The track lighting was the next thing to go! Wiring in this type of house is interesting - I had to drill some long holes in beams.)

Building on 2' centers is not needed with this type of construction for normal people and furniture loads. I have no idea about heavy shop equipment. You might call one of the timberframe companies and talk to an engineer to get specifics.

JKJ


img

Re: T@G floor spans

#6

Re: T@G floor spans

Fred Davis

>Hamish ,

John is correct in thinking a 2x6 or 2x8 subfloor wil carry a residential load on it, on 48 " centers.

In a residence , heavy dead loads like Piano's or Fridges are typically placed near outside walls , open center spaces are more typically live loaded with foot traffic and do not suffer from the constant strain of dead loading.

If your heart is not set on the white Pine subfloor/finish flooring , consider 241 T&G 4'X 8' plywood panels set on 24" or even 32" max centers which will give you a smooth surface for finish flooring.

I made 1/8th inch tempered Masonite squares 15 7/8ths inch square and painted two part epoxy paint by Porter Paint on it ten years ago and it still shows no wear.

Regardless of the finish flooring , you will need a substantially stiffer subfloor then you typically find in a residence.

Planers Tablesaws ,Jointers, big projects, all need the support designed for them.

Bond all subflooring to the girders/joists with PL500 , it greatly increases the strength of the floor.

Happy building,

FredD

Re: T@G floor spans

#7

Re: T@G floor spans

Chris Friesen

>Particle board? Why?

Particle board is heavy and not very strong or stiff. It doesn't hold nails well, and swells when wet. It's _only_ redeeming feature for flooring is that it's smooth and uniform. This is useful when using it as an underlayment under resilient flooring.

In the case of the the 2x6 T&G flooring mentioned by Hamish, putting down particleboard is not going to help at all.

Re: T@G floor spans

#8

Re: T@G floor spans

Fred Davis

>Truer words are seldom spoken

FredD

Re: T@G floor spans

#9

Re: T@G floor spans

Fred Davis

>What you said about PT board not adding any strength to the flooring also applies to John's finish flooring of 3/4" pine laid over the subfloor, IF he didn't bond the two together with construction adhesive/

The floors stiffness is not enhanced in any way by adding a layer to it unbonded. Your only adding weight.

FredD

Re: T@G floor spans

#10

pay the man

John K Jordan

>As far as I can tell by examining a closet my heart pine flooring is simply nailed to the 2x6 T&G, crossed 90 degrees.

I forgot to mention how I solved a similar design question of spans and loads when modifying my house. Rather than take a poll I called up an engineer recommended by a friend who owns an architect firm. The engineer calculated what I needed based on my intended materials, load, and spans and sent me a drawing with notes so there was no possibility of misunderstanding. I sent him a check for his work and everyone was happy.

Some things are just worth paying for.

JKJ

Re: T@G floor spans

#11

Re: pay the man is the correct way *LINK*

GalenV

>John is correct that just getting input from this site will not solve your problem. It is best to pay someone to design your flooring system. It is not as simple as just the span of the flooring itself but the whole design of the plank and beam system. A local architect will know what is required by your local building code to start with. If you think you want 2x6 T&G in select grade pine that is three items he can use. You seem to know about what you want for a live load and he can figure the dead load as well. He should be able to tell you the most economical decking material, grade, span,thickness, and width for the flooring. He will come up with the beam size needed for the span of the floor and the foundation to support it.

Galen


Just one reference to design

Re: T@G floor spans

#12

Re: pay the man is the correct way

Fred Davis

>Well Galen ,

I will have to disagree with some of your assumptions regarding Architects and building codes.

Architects , especially ones who have never done hands on work in the building trades are not qualified to certify spans and stress and strains. That's why you see building departments requiring a Structural Engineer's stamp on the approved plans, it's his license on the line , not the Architects.

Any building contractor or Carpenter who works as a layout man will tell you the first thing they do with a Architect designed building is check the inside dimensions against the outside dimensions , All have seen many times that the drawn floor plan was wider inside , then outside.

I have on many occasions working as a construction superintendent or the General Contractor have had to call the Designers office to tell them of discrepancies in the plan and they send out a rep who is still learning as a rule , not the guy who's name is on the plan and he after looking at say, a bathroom with 55 inch interior width and a 60 inch long standard tub laid from wall to wall tells me , you figure it out and we will send a addendum approval for the change in plans.

2. As for building codes , it is always good to remember they are a minimum set of requirements.

3. As I have stated before , the difference between a 1"1/2 unbonded subfloor overlayed with a unbonded 3/4" finish floor is not any stronger , nor as strong as the 1"1/2 subfloor by it's self.

When you bond the two together , then you have a sandwich equal to a 2 1/4 inch thick floor acting as one. This should be relatively easy to see for nearly anyone and is considered good construction practice and is required in many jurisdictions.

One last tip to the uninitiated , if your considering a big remodel requiring room additions or roof line changes or a new facade, look for your friendly local "House Designer" who does many more of these types of jobs then a AIA registered Architect and is much cheaper and easy to work with and you still need the Structural engineers stamp if it goes beyond replacement of already existing structure .

FredD