Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Jessem Mast R Slide Protractor

Posts

Jessem Mast R Slide Protractor

#1

Jessem Mast R Slide Protractor

Jonathan Spool

>Hi,

I've been thinking of purchasing a new tablesaw, and equiping it with a Jessem sliding table. However, I cannot find any documentation regarding what the sliding table uses so you can set the angle of the miter fence. Is there none, and you must utilize a seperate fence for repeatable angle cuts, or am I missing something? Am I better off going with an Incra or Jointech miter sled?

Thanks

Jonathan

Re: Jessem Mast R Slide Protractor

#2

Louie Lovas

Re: Jessem Mast R Slide Protractor

Louie Lovas

>I've owned the JessEm Mast-R-Slide for about 3 years. I bought one about 2 months after they came out. In my opinion, it's about the best invention since the toaster.

However, while it can and does cut miters it's main benefit is long 90 degree crosscuts (25" to 30"). The fence does not have any preset stops at any angle. Setting the fence for 90, 45 or any other angle is manual, make-a-test-cut process. Actually, if I'm making a bunch of miter cuts, I remove the JessEm fence and use my dedicated miter table (a shop-made version of the JointTech you referred to).

So just to restate, the JessEm sliding table's ideal use is cross cutting not miter cuts. If your main purpose is mitering, look elsewhere.

Best of luck,

Louie