Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

sutherland welles finish

Posts

sutherland welles finish

#1

sutherland welles finish

les winter

>I like to use Sutherland Welles polymerized tung oil finish. You can buy it direct or from LV. It comes in high luster, medium luster low luster and sealer. By combining the various types, the luster can be altered.

So I ran out of sealer and have only medium and high luster on hand. I want to finish up my kitchen cabinets over the weekend.

So I called the manufactuer and asked if you can thin the stuff to reduce the luster. The answer is yes you can. Here are the formuals

Change high luster to sealer: mix 50/50 with odorless mineral spirits.

Change medium luster to sealer: mix 1/3 spirits to 2/3 finish.

So it would seem that you can just order the high luster and thin it down to any other luster you desire.

I'm back in business.

regards

Les

Re: sutherland welles finish

#2

Re: sutherland welles finish

GolfSteve in Calgary

>I've been doing that for years with good success.

The first coat I usually dilute the tung oil about 50/50 with turpentine or odourless mineral spirits depending on what I want to smell that day.

The next coat I top up my little jar with more tung oil. I'm now down to around 75% tung oil, 25% thinner.

The next coat I top up the jar again, and I'm getting to close to pure polymerized tung oil.

Five or six more coats later and I get really nice build.

Then I screw it up somehow.

Then one more coat and it's perfect.